Skip to content
FiftyCalc Free calculators for all 50 states

Pond Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Enter the pond's shape and size, its average depth for the volume and its deepest point for the liner.

Result

Sample figures

Volume (US gallons)—

Volume (cubic feet) —

  • Volume (liters)—
  • Liner length (feet)—
  • Liner width (feet)—
  • Liner area (square feet)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Pond Calculator

Units: switches the fields between the two unit systems.

Pond shape

Pond shape: choose Rectangular or Round or oval. Prefilled example: Rectangular.

Length, or diameter, in ft: enter 0 or more. Prefilled example: 10.

Width (same as length for round), in ft: enter 0 or more. Prefilled example: 8.

Average depth, in ft: enter 0 or more. Prefilled example: 2.

Maximum depth, in ft: enter 0 or more. Prefilled example: 3.

Liner overlap at each edge, in ft: enter 0 or more. Prefilled example: 1.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for pond liners. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Pond shape: choose Rectangular or Round or oval.
  3. Length, or diameter, in ft: enter 0 or more.
  4. Width (same as length for round), in ft: enter 0 or more.
  5. Average depth, in ft: enter 0 or more.
  6. Maximum depth, in ft: enter 0 or more.
  7. Liner overlap at each edge, in ft: enter 0 or more.
  8. Read the result: Volume (US gallons); the panel also shows Volume (cubic feet), Volume (liters), Liner length (feet), Liner width (feet) and Liner area (square feet).

Sources

How this calculator works

Volume = surface area × average depth; area = length × width for a rectangle or π ÷ 4 × length × width for an oval (a circle when both are equal). Gallons = cubic feet × 1,728 ÷ 231.

Liner: length (or width) + 2 × maximum depth + 2 × overlap, so the sheet reaches down both walls and lies flat past each edge. Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds.

The formula

  1. Cu={L×Wif s=1π4×L×Wotherwise×d
  2. Gal=Cu×1,728231
Symbols used in the formula
SymbolMeaningUnit
sPond shape (1: Rectangular; 2: Round or oval)
LLength, or diameterft
WWidth (same as length for round)ft
dAverage depthft
CuVolumecubic feet
GalVolumeUS gallons

Worked example

Pond shapeRectangular
Length, or diameter10 ft
Width (same as length for round)8 ft
Average depth2 ft
Maximum depth3 ft
Liner overlap at each edge1 ft
Volume (cubic feet)160.0
Volume (liters)4,531
Liner length (feet)18.0
Liner width (feet)16.0
Liner area (square feet)288
  1. Cu=10×8×2=160
  2. Gal=160×1,728231=1,196.88

Volume (US gallons) 1,197

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many gallons in a 10 by 8 foot pond 2 feet deep?

160 cubic feet × 7.4805 = about 1,197 gallons.

What liner for a 10 by 8 foot pond 3 feet deep?

With 1-foot overlap: 10 + 6 + 2 = 18 by 8 + 6 + 2 = 16 feet.

Questions answered

Related calculators