Porosity and Permeability Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Porosity is how much of a sample is empty space; permeability is how easily fluid flows through it. Enter the volumes and the results of a flow test.
Result
Porosity
Permeability (µm², × 10⁻¹² m²)
- Permeability (darcys)
- Permeability (millidarcys)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Pore volume, in cm³: enter 0 or more.
- Bulk volume of the sample, in cm³: enter 0 or more.
- Flow rate through the sample (cm³/s): enter 0 or more.
- Fluid viscosity (cP): enter 0 or more.
- Sample length along the flow, in cm: enter 0 or more.
- Cross-section area, in cm²: enter 0 or more.
- Pressure difference across the sample, in kPa: enter 0 or more.
- Read the result: Porosity; the panel also shows Permeability (µm², × 10⁻¹² m²), Permeability (darcys) and Permeability (millidarcys).
How this calculator works
Porosity φ = V_pores ÷ V_bulk. Permeability from Darcy's law for steady laminar flow: k = Q μ L ÷ (A Δp), where Q is the flow rate, μ the fluid viscosity, L the sample length, A its cross-section and Δp the pressure difference.
One darcy is the permeability that passes 1 cm³/s of a 1 cP fluid through 1 cm² under a gradient of 1 atm per cm; 1 darcy = 9.869233 × 10⁻¹³ m² (NIST SP 811, Appendix B, read October 27, 2026). 1 atm = 101.325 kPa (CODATA 2022, NIST).
Porous does not always mean permeable: clay can hold much water yet let it pass very slowly, because its pores are tiny.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Pore volume | cm³ | |
| Bulk volume of the sample | cm³ | |
| Porosity | % |
Worked example
| Pore volume | 20 cm³ |
|---|---|
| Bulk volume of the sample | 100 cm³ |
| Flow rate through the sample (cm³/s) | 0.5 |
| Fluid viscosity (cP) | 1 |
| Sample length along the flow | 5 cm |
| Cross-section area | 10 cm² |
| Pressure difference across the sample | 101.325 kPa |
| Permeability (µm², × 10⁻¹² m²) | 0.2467 |
|---|---|
| Permeability (darcys) | 0.25 |
| Permeability (millidarcys) | 250 |
Porosity 20%
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is the permeability if 0.5 cm³/s of a 1 cP fluid passes a 5 cm, 10 cm² sample under 1 atm?
0.25 darcy (250 millidarcys).
What is the difference between porosity and permeability?
Porosity is how much space there is; permeability is how well the spaces connect for flow.