Skip to content
FiftyCalc Free calculators for all 50 states

Rock Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Estimate the rock you need for landscaping, drainage or a base layer, in cubic yards and tons.

Result

Sample figures

Gravel needed—cu yd

Volume (cubic feet) —

  • Approximate weight (tons)—
  • Cost at your price—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Rock Calculator

Length, in ft: enter 0 or more. Prefilled example: 50.

Width, in ft: enter 0 or more. Prefilled example: 10.

Depth, in in: enter 0 or more. Prefilled example: 4.

Density (tons per cubic yard; example value, replace it with your supplier's figure): enter a number from 0.5 to 3. Prefilled example: 1.4.

Price per ton (example), in dollars: enter 0 or more. Prefilled example: 45.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Length, in ft: enter 0 or more.
  2. Width, in ft: enter 0 or more.
  3. Depth, in in: enter 0 or more.
  4. Density (tons per cubic yard; example value, replace it with your supplier's figure): enter a number from 0.5 to 3.
  5. Price per ton (example), in dollars: enter 0 or more.
  6. Read the result: Gravel needed; the panel also shows Volume (cubic feet), Approximate weight (tons) and Cost at your price.

How this calculator works

Cubic yards = length × width in feet × depth in inches ÷ 12 ÷ 27, then tons = cubic yards × density. Larger rock leaves more gaps but is denser per piece, so ask the yard for its tons per cubic yard.

Add a little extra for uneven ground and for settling.

The formula

  1. C=l×w×d12
  2. Y=C27
Symbols used in the formula
SymbolMeaningUnit
lLengthft
wWidthft
dDepthin
CVolumecubic feet
YGravel neededcu yd

Worked example

Length50 ft
Width10 ft
Depth4 in
Density (tons per cubic yard; example value, replace it with your supplier's figure)1.4
Price per ton (example)$45
Volume (cubic feet)166.67
Approximate weight (tons)8.64
Cost at your price$389
  1. C=50×10×412=166.667
  2. Y=166.66727=6.17284

Gravel needed 6.17 cu yd

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much rock for a 12 × 12 ft area 2 inches deep?

About 0.89 cubic yard; multiply by your supplier's tons per cubic yard to get the weight.

Is rock sold by the yard or by the ton?

Both are common; this calculator gives both so you can compare quotes.

Questions answered

Related calculators