Skip to content
FiftyCalc Free calculators for all 50 states

Rolling Offset Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Measure the roll and the set between the two pipe centerlines, choose the fitting angle and read the travel.

Result

Sample figures

Travel, center to center—in

True offset (inches) —

  • Run, advance along the pipe (inches)—
  • Travel multiplier for this angle—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Rolling Offset Calculator

Units: switches the fields between the two unit systems.

Roll, side offset, in in: enter 0 or more. Prefilled example: 12.

Set, vertical offset, in in: enter 0 or more. Prefilled example: 16.

Fitting angle

Fitting angle: choose 45°, 60°, 22½° or 11¼°. Prefilled example: 45°.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Roll, side offset, in in: enter 0 or more.
  3. Set, vertical offset, in in: enter 0 or more.
  4. Fitting angle: choose 45°, 60°, 22½° or 11¼°.
  5. Read the result: Travel, center to center; the panel also shows True offset (inches), Run, advance along the pipe (inches) and Travel multiplier for this angle.

How this calculator works

The roll and the set are the two legs of a right triangle whose hypotenuse is the true offset: √(roll² + set²). For a fitting angle θ, travel = true offset ÷ sin θ and run = true offset ÷ tan θ. The multiplier 1 ÷ sin θ is 1.4142 for 45° and 2.6131 for 22½°.

Travel is center to center; subtract the fitting take-off of both ends to get the cut length of the pipe.

The formula

  1. To=r2+set2
  2. Tr=Tosin⁡(rad⁡(ang))
Symbols used in the formula
SymbolMeaningUnit
rRoll, side offsetin
setSet, vertical offsetin
angFitting angle
ToTrue offsetinches
TrTravel, center to centerin
rad(x)the angle x, converted from degrees to radians.

Worked example

Roll, side offset12 in
Set, vertical offset16 in
Fitting angle45°
True offset (inches)20.00
Run, advance along the pipe (inches)20.00
Travel multiplier for this angle1.4142
  1. To=122+162=20
  2. Tr=20sin⁡(rad⁡(45))=28.2843

Travel, center to center 28.28 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What travel for a 12-inch roll and 16-inch set with 45° fittings?

True offset √(144 + 256) = 20 inches; travel = 20 × 1.4142 = 28.28 inches.

What is the difference between roll and set?

Set is the offset in one plane and roll in the plane at right angles to it; together they make the true offset.

Questions answered

Related calculators