Siding Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the house walls, the gables and the openings to get the siding to order.
Result
Siding squares (100 sq ft each)
Net wall area (square feet)
- Siding to order with waste (square feet)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Total length of the walls, the perimeter, in ft: enter 0 or more.
- Wall height, foundation to eaves, in ft: enter 0 or more.
- Number of gable ends: enter 0 or more.
- Gable width at the base, in ft: enter 0 or more.
- Gable height, eaves to peak, in ft: enter 0 or more.
- Area of windows and doors, in sq ft: enter 0 or more.
- Waste allowance (starting figure; replace it with your installer's or supplier's recommendation), in percent: enter a number from 0 to 50.
- Read the result: Siding squares (100 sq ft each); the panel also shows Net wall area (square feet) and Siding to order with waste (square feet).
How this calculator works
Net area = perimeter × wall height + gables × ½ × gable width × gable height − openings. A gable end is a triangle, so its area is half its base times its height.
A siding square, as used here, is 100 square feet of wall coverage.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Total length of the walls, the perimeter | ft | |
| Wall height, foundation to eaves | ft | |
| Number of gable ends | ||
| Gable width at the base | ft | |
| Gable height, eaves to peak | ft | |
| Area of windows and doors | sq ft | |
| Waste allowance (starting figure; replace it with your installer's or supplier's recommendation) | % | |
| Net wall area | square feet | |
| Siding to order with waste | square feet | |
| Siding squares (100 sq ft each) | ||
max(a, b, …) | the largest of the values. |
Worked example
| Total length of the walls, the perimeter | 140 ft |
|---|---|
| Wall height, foundation to eaves | 9 ft |
| Number of gable ends | 2 |
| Gable width at the base | 30 ft |
| Gable height, eaves to peak | 6 ft |
| Area of windows and doors | 200 sq ft |
| Waste allowance (starting figure; replace it with your installer's or supplier's recommendation) | 10% |
| Net wall area (square feet) | 1240.0 |
|---|---|
| Siding to order with waste (square feet) | 1364.0 |
Siding squares (100 sq ft each) 13.64
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How many squares of siding for a 1,500 sq ft wall area?
With 10% waste, 1,650 square feet, so 16.5 squares.
Do I subtract windows and doors?
Yes for the net area. Trim around them (J-channel, casing) is ordered separately by the linear foot.