Skip to content
FiftyCalc Free calculators for all 50 states

Spiral Staircase Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Enter the floor-to-floor height, the stair diameter and the total rotation to lay out the treads.

Result

Sample figures

Number of risers—

Riser height (inches) —

  • Treads (the top floor is the last step)—
  • Angle per tread (degrees)—
  • Tread depth at the walkline, 12 in from the column (inches)—
  • Clear width, column to outer edge (inches)—
  • Spiral stair dimensions checked here—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Spiral Staircase Calculator

Units: switches the fields between the two unit systems.

Floor-to-floor height, in in: enter 0 or more. Prefilled example: 108.

Stair diameter, in in: enter 0 or more. Prefilled example: 60.

Center column diameter, in in: enter 0 or more. Prefilled example: 4.

Total rotation, in °: enter a number from 90 to 720. Prefilled example: 360.

Maximum riser height, in in: enter 1 or more. Prefilled example: 9.5.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Floor-to-floor height, in in: enter 0 or more.
  3. Stair diameter, in in: enter 0 or more.
  4. Center column diameter, in in: enter 0 or more.
  5. Total rotation, in °: enter a number from 90 to 720.
  6. Maximum riser height, in in: enter 1 or more.
  7. Read the result: Number of risers; the panel also shows Riser height (inches), Treads (the top floor is the last step), Angle per tread (degrees), Tread depth at the walkline, 12 in from the column (inches), Clear width, column to outer edge (inches) and Spiral stair dimensions checked here.

Sources

How this calculator works

Risers = height ÷ maximum riser, rounded up; riser height = height ÷ risers. With the upper floor as the last step, treads = risers − 1, and each tread turns rotation ÷ treads degrees.

Tread depth at the walkline = 2π × walkline radius × angle ÷ 360, where the walkline radius is the column radius + 12 inches.

Boulder County (Colorado) building handout B32, per Section 311 of the 2021 International Residential Code, sets for spiral stairways: tread depth at least 6-3/4 in at a point 12 in from the narrow edge, tread width at least 26 in, rise at most 9-1/2 in and headroom at least 6 ft 6 in (not checked here). Your local code governs.

The formula

  1. R=ceil⁡(Hm)
Symbols used in the formula
SymbolMeaningUnit
HFloor-to-floor heightin
mMaximum riser heightin
RNumber of risers
ceil(x)the smallest whole number not below x.

Worked example

Floor-to-floor height108 in
Stair diameter60 in
Center column diameter4 in
Total rotation360 °
Maximum riser height9.5 in
Riser height (inches)9.00
Treads (the top floor is the last step)11
Angle per tread (degrees)32.73
Tread depth at the walkline, 12 in from the column (inches)8.00
Clear width, column to outer edge (inches)28.00
Spiral stair dimensions checked hereWithin the 2021 IRC spiral stair figures checked here (riser, tread at walkline, width)
  1. R=ceil⁡(1089.5)=12

Number of risers 12

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many steps for a 9-foot ceiling?

108 inches with a 9.5-inch maximum riser gives 12 risers of 9 inches and 11 treads.

What diameter does a spiral stair need?

A 26-inch minimum tread width means a stair of at least 52 inches plus the column; 60 inches with a 4-inch column gives 28 inches.

Questions answered

Related calculators