Skip to content
FiftyCalc Free calculators for all 50 states

Stair Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the total rise and your target maximum riser and tread depth.

Result

Sample figures

Number of risers—

Riser height (inches) —

  • Number of treads—
  • Total run (inches)—
  • Stringer length (inches)—
  • Stair angle (degrees)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Stair Calculator

Total rise, floor to floor, in in: enter 1 or more. Prefilled example: 108.

Maximum riser height (example value; enter the limit of the building code your local building department applies), in in: enter a number from 4 to 9. Prefilled example: 7.75.

Tread depth (example value; enter the minimum of your local building code), in in: enter a number from 8 to 14. Prefilled example: 10.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for stair treads. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Total rise, floor to floor, in in: enter 1 or more.
  2. Maximum riser height (example value; enter the limit of the building code your local building department applies), in in: enter a number from 4 to 9.
  3. Tread depth (example value; enter the minimum of your local building code), in in: enter a number from 8 to 14.
  4. Read the result: Number of risers; the panel also shows Riser height (inches), Number of treads, Total run (inches), Stringer length (inches) and Stair angle (degrees).

How this calculator works

Risers = total rise ÷ maximum riser, rounded up; actual riser = total rise ÷ risers. Treads = risers − 1 when the top step is the upper floor.

Total run = treads × tread depth. Stringer length = √(rise² + run²).

The formula

  1. Ri=ceil⁡(rm)
Symbols used in the formula
SymbolMeaningUnit
rTotal rise, floor to floorin
mMaximum riser height (example value; enter the limit of the building code your local building department applies)in
RiNumber of risers
ceil(x)the smallest whole number not below x.

Worked example

Total rise, floor to floor108 in
Maximum riser height (example value; enter the limit of the building code your local building department applies)7.75 in
Tread depth (example value; enter the minimum of your local building code)10 in
Riser height (inches)7.71
Number of treads13
Total run (inches)130.00
Stringer length (inches)169.01
Stair angle (degrees)37.6
  1. Ri=ceil⁡(1087.75)=14

Number of risers 14

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many steps for a 9-foot ceiling?

For about 108 inches of rise, 14 risers of 7.71 inches and 13 treads.

Questions answered

Related calculators