Stair Carpet Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the number of steps and their size to get the carpet area, and the runner length if you use a runner.
Result
Carpet with wastesq yd
Carpet per step (square feet)
- Carpet with waste (square feet)
- Runner length, no waste (feet)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
Affiliate link
This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.
Homestyler is an online home design tool with a free basic plan and paid memberships. Visit Homestyler
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Number of steps (treads): enter 1 or more.
- Stair or runner width, in in: enter 0 or more.
- Tread depth, in in: enter 0 or more.
- Riser height, in in: enter 0 or more.
- Extra for wrapping the nosing (inches per step): enter 0 or more.
- Landing area, in sq ft: enter 0 or more.
- Waste allowance, in percent: enter a number from 0 to 50.
- Read the result: Carpet with waste; the panel also shows Carpet per step (square feet), Carpet with waste (square feet) and Runner length, no waste (feet).
How this calculator works
Each step takes width × (tread depth + riser height + nosing wrap) of carpet; divide square inches by 144 for square feet. Add the landing, then the waste allowance. Square yards = square feet ÷ 9.
Carpet is sold from rolls, and the pile should run the same way on every step, so the real waste depends on how the pieces are cut from the roll.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Number of steps (treads) | ||
| Stair or runner width | in | |
| Tread depth | in | |
| Riser height | in | |
| Extra for wrapping the nosing (inches per step) | ||
| Landing area | sq ft | |
| Waste allowance | % | |
| Carpet per step | square feet | |
| Carpet with waste | square feet | |
| Carpet with waste | sq yd |
Worked example
| Number of steps (treads) | 13 |
|---|---|
| Stair or runner width | 36 in |
| Tread depth | 10 in |
| Riser height | 7.5 in |
| Extra for wrapping the nosing (inches per step) | 2 |
| Landing area | 0 sq ft |
| Waste allowance | 10% |
| Carpet per step (square feet) | 4.88 |
|---|---|
| Carpet with waste (square feet) | 69.71 |
| Runner length, no waste (feet) | 21.13 |
Carpet with waste 7.75 sq yd
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How much carpet for 13 stairs?
For 36-inch-wide stairs with 10-inch treads, 7.5-inch risers and a 2-inch nosing wrap, 63.38 square feet before waste, 7.75 square yards with 10% waste.
Do I count the top landing as a step?
No. Count the treads; enter the top landing's area separately.