Skip to content
FiftyCalc Free calculators for all 50 states

Surface Tension Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the capillary rise, the tube radius, the liquid density and the contact angle to get the surface tension.

Result

Sample figures

Surface tension γ (mN/m)—

Surface tension γ (N/m) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Surface Tension Calculator

Capillary rise h, in mm: enter 0 or more. Prefilled example: 30.

Tube inner radius r, in mm: enter 0 or more. Prefilled example: 0.5.

Liquid density ρ (kg/m³): enter 0 or more. Prefilled example: 1,000.

Contact angle θ (0 = fully wetting), in °: enter a number from 0 to 89. Prefilled example: 0.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Capillary rise h, in mm: enter 0 or more.
  2. Tube inner radius r, in mm: enter 0 or more.
  3. Liquid density ρ (kg/m³): enter 0 or more.
  4. Contact angle θ (0 = fully wetting), in °: enter a number from 0 to 89.
  5. Read the result: Surface tension γ (mN/m); the panel also shows Surface tension γ (N/m).

How this calculator works

Jurin's law: h = 2γ cos θ ÷ (ρ g r), so γ = ρ g h r ÷ (2 cos θ). ρ is the liquid density, r the tube radius, θ the contact angle and g = 9.80665 m/s² (NIST CODATA 2022 values, read on physics.nist.gov/cuu on 2026-10-27).

The formula

  1. G=ρ×9.80665×(h÷1,000)×(r÷1,000)2×cos⁡(rad⁡(th))
  2. Mn=G×1,000
Symbols used in the formula
SymbolMeaningUnit
hCapillary rise hmm
rTube inner radius rmm
ρLiquid density ρkg/m³
thContact angle θ (0 = fully wetting)°
GSurface tension γ (N/m)
MnSurface tension γ (mN/m)
rad(x)the angle x, converted from degrees to radians.

Worked example

Capillary rise h30 mm
Tube inner radius r0.5 mm
Liquid density ρ (kg/m³)1,000
Contact angle θ (0 = fully wetting)0 °
Surface tension γ (N/m)0.0735
  1. G=1,000×9.80665×(30÷1,000)×(0.5÷1,000)2×cos⁡(rad⁡(0))=0.0735499
  2. Mn=0.0735499×1,000=73.5499

Surface tension γ (mN/m) 73.5499

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What surface tension gives a 30 mm rise in a 0.5 mm radius tube?

About 73.55 mN/m for a liquid of 1,000 kg/m³ with θ = 0.

Why do thinner tubes give higher rise?

The rise is inversely proportional to the radius.

Related calculators