Skip to content
FiftyCalc Free calculators for all 50 states

Thermal Conductivity Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the steady heat flow, the slab thickness and area, and the temperature difference across it to get its thermal conductivity.

Result

Sample figures

Thermal conductivity k (W/(m·K))—

Thermal conductivity (Btu·in/(h·ft²·°F)) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Thermal Conductivity Calculator

Heat flow rate (W): enter 0 or more. Prefilled example: 50.

Thickness, in mm: enter 0 or more. Prefilled example: 25.

Area, in m²: enter 0 or more. Prefilled example: 0.5.

Temperature difference across the slab (K or °C): enter 0 or more. Prefilled example: 40.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Heat flow rate (W): enter 0 or more.
  2. Thickness, in mm: enter 0 or more.
  3. Area, in m²: enter 0 or more.
  4. Temperature difference across the slab (K or °C): enter 0 or more.
  5. Read the result: Thermal conductivity k (W/(m·K)); the panel also shows Thermal conductivity (Btu·in/(h·ft²·°F)).

How this calculator works

k = Q × L ÷ (A × ΔT), Fourier's law of heat conduction for steady flow through a flat slab: Q in watts, L in meters, A in m², ΔT in kelvins.

1 W/(m·K) = 6.933472 Btu·in/(h·ft²·°F), from NIST's factor 1 °F·h·ft²/(Btu·in) = 6.933472 m·K/W (NIST SP 811, Appendix B.9 conversion factors, read on nist.gov on 2026-10-27).

The formula

  1. K=q×(l÷1,000)a×dt
Symbols used in the formula
SymbolMeaningUnit
qHeat flow rateW
lThicknessmm
aAream²
dtTemperature difference across the slabK or °C
KThermal conductivity k (W/(m·K))

Worked example

Heat flow rate (W)50
Thickness25 mm
Area0.5 m²
Temperature difference across the slab (K or °C)40
Thermal conductivity (Btu·in/(h·ft²·°F))0.4333
  1. K=50×(25÷1,000)0.5×40=0.0625

Thermal conductivity k (W/(m·K)) 0.0625

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is k if 50 W flows through 25 mm, 0.5 m², ΔT = 40 K?

0.0625 W/(m·K).

Is a low k good for insulation?

Yes. Insulation has low thermal conductivity.

Related calculators