Skip to content
FiftyCalc Free calculators for all 50 states

Thermal Stress Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter Young's modulus, the coefficient of linear expansion and the temperature change of a bar held at both ends.

Result

Sample figures

Thermal stress (MPa, compressive when heated)—

Thermal stress (psi) —

  • Prevented thermal strain αΔT—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Thermal Stress Calculator

Young's modulus E, in GPa: enter 0 or more. Prefilled example: 200.

Coefficient of linear expansion α (× 10⁻⁶ per °C): enter 0 or more. Prefilled example: 12.

Temperature change ΔT: enter a number. Prefilled example: 40.

Temperature unit for ΔT

Temperature unit for ΔT: choose °C or K or °F. Prefilled example: °C or K.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Young's modulus E, in GPa: enter 0 or more.
  2. Coefficient of linear expansion α (× 10⁻⁶ per °C): enter 0 or more.
  3. Temperature change ΔT: enter a number.
  4. Temperature unit for ΔT: choose °C or K or °F.
  5. Read the result: Thermal stress (MPa, compressive when heated); the panel also shows Thermal stress (psi) and Prevented thermal strain αΔT.

How this calculator works

σ = E × α × ΔT for a bar fully restrained at both ends: the free thermal strain αΔT is prevented, so the elastic strain equals it with the opposite sign (Hooke's law). Heating gives compression, cooling tension.

1 psi = 6,894.757 Pa (NIST SP 811, Appendix B.9 conversion factors, read on nist.gov on 2026-10-27).

The formula

  1. Mpa=e×1,000×α×0.000001×dt×tu
Symbols used in the formula
SymbolMeaningUnit
eYoung's modulus EGPa
αCoefficient of linear expansion α (× 10⁻⁶ per °C)
dtTemperature change ΔT
tuTemperature unit for ΔT
MpaThermal stress (compressive when heated)MPa

Worked example

Young's modulus E200 GPa
Coefficient of linear expansion α (× 10⁻⁶ per °C)12
Temperature change ΔT40
Temperature unit for ΔT°C or K
Thermal stress (psi)13,923.6234
Prevented thermal strain αΔT0.0005
  1. Mpa=200×1,000×12×0.000001×40×1=96

Thermal stress (MPa, compressive when heated) 96

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What stress does a 40 °C rise put in restrained material with E = 200 GPa, α = 12 × 10⁻⁶/°C?

96 MPa (about 13,923.6 psi) in compression.

Does the bar length matter?

No. For full restraint, stress depends only on E, α and ΔT.

Related calculators