Skip to content
FiftyCalc Free calculators for all 50 states

Tile Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the area, the tile size and the grout joint to get the tile count.

Result

Sample figures

Tiles needed—

Area (square feet) —

  • Boxes needed—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Tile Calculator

Units: switches the fields between the two unit systems.

Area length, in ft: enter 0 or more. Prefilled example: 10.

Area width, in ft: enter 0 or more. Prefilled example: 8.

Tile length, in in: enter 0.5 or more. Prefilled example: 12.

Tile width, in in: enter 0.5 or more. Prefilled example: 12.

Grout joint, in in: enter a number from 0 to 1. Prefilled example: 0.125.

Waste allowance (starting figure; replace it with your installer's or supplier's advice), in percent: enter a number from 0 to 30. Prefilled example: 10.

Tiles per box: enter 1 or more. Prefilled example: 10.

Affiliate link

This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.

Homestyler is an online home design tool with a free basic plan and paid memberships. Visit Homestyler

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Area length, in ft: enter 0 or more.
  3. Area width, in ft: enter 0 or more.
  4. Tile length, in in: enter 0.5 or more.
  5. Tile width, in in: enter 0.5 or more.
  6. Grout joint, in in: enter a number from 0 to 1.
  7. Waste allowance (starting figure; replace it with your installer's or supplier's advice), in percent: enter a number from 0 to 30.
  8. Tiles per box: enter 1 or more.
  9. Read the result: Tiles needed; the panel also shows Area (square feet) and Boxes needed.

How this calculator works

Tiles = area (sq ft) × 144 ÷ ((tile length + joint) × (tile width + joint)), × (1 + waste ÷ 100), rounded up.

The formula

  1. A=l×w
  2. T=ceil⁡(A×144(tl+j)×(tw+j)×(1+wa100))
Symbols used in the formula
SymbolMeaningUnit
lArea lengthft
wArea widthft
tlTile lengthin
twTile widthin
jGrout jointin
waWaste allowance (starting figure; replace it with your installer's or supplier's advice)%
AAreasquare feet
TTiles needed
ceil(x)the smallest whole number not below x.

Worked example

Area length10 ft
Area width8 ft
Tile length12 in
Tile width12 in
Grout joint0.125 in
Waste allowance (starting figure; replace it with your installer's or supplier's advice)10%
Tiles per box10
Area (square feet)80.00
Boxes needed9
  1. A=10×8=80
  2. T=ceil⁡(80×144(12+0.125)×(12+0.125)×(1+10100))=87

Tiles needed 87

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many 12×12 tiles do I need for 100 square feet?

About 98 tiles with a 1/8-inch joint, or 108 with 10% waste.

Questions answered

Related calculators