Skip to content
FiftyCalc Free calculators for all 50 states

Wall Stud Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the wall length, stud spacing and extra studs for corners, doors and windows.

Result

Sample figures

Studs—

Plate lumber (linear feet) —

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Wall Stud Calculator

Units: switches the fields between the two unit systems.

Wall length, in ft: enter 0 or more. Prefilled example: 20.

Stud spacing (on center)

Stud spacing (on center): choose 12 in, 16 in or 24 in. Prefilled example: 16 in.

Extra studs (corners, doors, windows): enter 0 or more. Prefilled example: 4.

Plates (1 bottom + 2 top = 3): enter a number from 1 to 4. Prefilled example: 3.

Waste allowance, in percent: enter a number from 0 to 30. Prefilled example: 10.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Wall length, in ft: enter 0 or more.
  3. Stud spacing (on center): choose 12 in, 16 in or 24 in.
  4. Extra studs (corners, doors, windows): enter 0 or more.
  5. Plates (1 bottom + 2 top = 3): enter a number from 1 to 4.
  6. Waste allowance, in percent: enter a number from 0 to 30.
  7. Read the result: Studs; the panel also shows Plate lumber (linear feet).

How this calculator works

Studs = (wall length in inches ÷ spacing, rounded down) + 1 end stud + extra studs, then × (1 + waste ÷ 100), rounded up.

Enter the extra studs your corners and openings need (king and jack studs) as shown on your framing plan. Plates = wall length × number of plates.

The formula

  1. St=ceil⁡((floor⁡(l×12s)+1+ex)×(1+w100))
Symbols used in the formula
SymbolMeaningUnit
lWall lengthft
sStud spacing (on center)
exExtra studs (corners, doors, windows)
wWaste allowance%
StStuds
ceil(x)the smallest whole number not below x.
floor(x)the largest whole number not above x.

Worked example

Wall length20 ft
Stud spacing (on center)16 in
Extra studs (corners, doors, windows)4
Plates (1 bottom + 2 top = 3)3
Waste allowance10%
Plate lumber (linear feet)60.0
  1. St=ceil⁡((floor⁡(20×1216)+1+4)×(1+10100))=22

Studs 22

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many studs for a 20-foot wall?

At 16 inches on center: 15 + 1 = 16 studs before corners, openings and waste.

Questions answered

Related calculators