Skip to content
FiftyCalc Free calculators for all 50 states

Y+ Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the flow speed, a reference length, the fluid density and viscosity and the y+ you want to get the first mesh cell height.

Result

Sample figures

First cell height y (micrometers, µm)—

Reynolds number —

  • Skin-friction coefficient Cf—
  • Wall shear stress (Pa)—
  • Friction velocity u_τ (m/s)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Y+ Calculator

Free-stream velocity, in m/s: enter 0 or more. Prefilled example: 10.

Reference length, in m: enter 0 or more. Prefilled example: 1.

Fluid density (kg/m³): enter 0 or more. Prefilled example: 1.225.

Dynamic viscosity (Pa·s): enter 0 or more. Prefilled example: 1.81e-05.

Target y+: enter 0 or more. Prefilled example: 1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Free-stream velocity, in m/s: enter 0 or more.
  2. Reference length, in m: enter 0 or more.
  3. Fluid density (kg/m³): enter 0 or more.
  4. Dynamic viscosity (Pa·s): enter 0 or more.
  5. Target y+: enter 0 or more.
  6. Read the result: First cell height y (micrometers, µm); the panel also shows Reynolds number, Skin-friction coefficient Cf, Wall shear stress (Pa) and Friction velocity u_τ (m/s).

How this calculator works

y+ = ρ u_τ y / μ, with friction velocity u_τ = √(τ_w / ρ). Solving for y gives the wall distance of the first mesh cell for the y+ you want (about 1 for wall-resolved models, 30 or more with wall functions).

The wall shear stress is estimated from the turbulent flat-plate law Cf = 0.0592 Re_x^(−1/5) (Prandtl's one-seventh-power-law result, used for 5 × 10⁵ < Re < 10⁷), τ_w = ½ Cf ρ U². It is a starting estimate; check the y+ the solver reports after a first run.

The formula

  1. Re=ρ×u×xμ
  2. Cf=0.0592×Re−0.2
  3. Tw=0.5×Cf×ρ×u2
  4. Ut=Twρ
  5. Y=yp×μρ×Ut×1,000,000
Symbols used in the formula
SymbolMeaningUnit
uFree-stream velocitym/s
xReference lengthm
ρFluid densitykg/m³
μDynamic viscosity (Pa·s)
ypTarget y+
ReReynolds number
CfSkin-friction coefficient Cf
TwWall shear stressPa
UtFriction velocity u_τ (m/s)
YFirst cell height y (micrometers, µm)

Worked example

Free-stream velocity10 m/s
Reference length1 m
Fluid density (kg/m³)1.225
Dynamic viscosity (Pa·s)1.81e-05
Target y+1
Reynolds number676,796
Skin-friction coefficient Cf0.004
Wall shear stress (Pa)0.2474
Friction velocity u_τ (m/s)0.4494
  1. Re=1.225×10×10.0000181=676,795.58
  2. Cf=0.0592×676,795.58−0.2=0.00403859
  3. Tw=0.5×0.00403859×1.225×102=0.247364
  4. Ut=0.2473641.225=0.449366
  5. Y=1×0.00001811.225×0.449366×1,000,000=32.8808

First cell height y (micrometers, µm) 32.8808

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What y+ should I aim for?

Around 1 when the turbulence model resolves the viscous sublayer (for example k-ω SST without wall functions), and about 30 to 300 when wall functions are used.

Why is this only an estimate?

Real geometries have pressure gradients and separation, so the local shear stress differs from the flat-plate value.

Related calculators