Skip to content
FiftyCalc Free calculators for all 50 states

Young-Laplace Equation Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the surface tension and the two principal radii of curvature to get the pressure difference across the interface.

Result

Sample figures

Pressure difference, ΔP—Pa

Pressure difference (kPa) —

  • Pressure difference (psi)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Young-Laplace Equation Calculator

Surface tension, γ (N/m): enter 0 or more. Prefilled example: 0.072.

First principal radius, R₁, in mm: enter 0 or more. Prefilled example: 1.

Second principal radius, R₂ (equal to R₁ for a sphere, very large for a cylinder), in mm: enter 0 or more. Prefilled example: 1.

Number of surfaces: choose One (droplet, or gas bubble inside a liquid) or Two (soap bubble or film with two faces). Prefilled example: One (droplet, or gas bubble inside a liquid).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Surface tension, γ (N/m): enter 0 or more.
  2. First principal radius, R₁, in mm: enter 0 or more.
  3. Second principal radius, R₂ (equal to R₁ for a sphere, very large for a cylinder), in mm: enter 0 or more.
  4. Number of surfaces: choose One (droplet, or gas bubble inside a liquid) or Two (soap bubble or film with two faces).
  5. Read the result: Pressure difference, ΔP; the panel also shows Pressure difference (kPa) and Pressure difference (psi).

How this calculator works

Young-Laplace equation (Young 1805, Laplace 1806): ΔP = γ × (1 ÷ R₁ + 1 ÷ R₂), the extra pressure on the concave side of a curved interface. For a sphere R₁ = R₂ = R and ΔP = 2γ ÷ R; for a cylinder one radius is infinite and ΔP = γ ÷ R.

A soap bubble has two surfaces, inner and outer, so its excess pressure doubles to 4γ ÷ R. Radii are entered in mm and converted to meters; 1 psi = 6.894757293168 kPa (NIST SP 811, Appendix B.9).

The formula

  1. Dp=ns×g×(1r1÷1,000+1r2÷1,000)
Symbols used in the formula
SymbolMeaningUnit
gSurface tension, γ (N/m)
r1First principal radius, R₁mm
r2Second principal radius, R₂ (equal to R₁ for a sphere, very large for a cylinder)mm
nsNumber of surfaces
DpPressure difference, ΔPPa

Worked example

Surface tension, γ (N/m)0.072
First principal radius, R₁1 mm
Second principal radius, R₂ (equal to R₁ for a sphere, very large for a cylinder)1 mm
Number of surfacesOne (droplet, or gas bubble inside a liquid)
Pressure difference (kPa)0.144
Pressure difference (psi)0.0209
  1. Dp=1×0.072×(11÷1,000+11÷1,000)=144

Pressure difference, ΔP 144 Pa

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the pressure inside a 1 mm radius droplet with γ = 0.072 N/m?

144 Pa above the outside: 2 × 0.072 ÷ 0.001.

Why do small bubbles have a higher pressure?

ΔP grows as 1 ÷ R, so halving the radius doubles the pressure difference.

Related calculators