Compression Ratio Calculator
Test cases replayed : 3 of 3 match · Methodology · No outside source listed
Enter the bore and stroke in inches and the volumes from your parts' spec sheets to get the static compression ratio of one cylinder.
Result
Static compression ratio (to 1)
Swept volume per cylinder (cc)
- Clearance volume (cc)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Bore, in in: enter 0 or more.
- Stroke, in in: enter 0 or more.
- Combustion chamber volume, in cc: enter 0 or more.
- Piston volume (cc): dish or valve reliefs +, dome −: enter -200 or more.
- Head gasket bore, in in: enter 0 or more.
- Head gasket compressed thickness, in in: enter 0 or more.
- Deck clearance, piston below deck, in in: enter -1 or more.
- Read the result: Static compression ratio (to 1); the panel also shows Swept volume per cylinder (cc) and Clearance volume (cc).
How this calculator works
Compression ratio = (swept volume + clearance volume) ÷ clearance volume. Swept volume = π/4 × bore² × stroke. Clearance volume = chamber + piston dish (or minus the dome) + gasket volume (π/4 × gasket bore² × thickness) + deck volume (π/4 × bore² × deck clearance).
1 in³ = 16.387064 cm³ (cc), since 1 in = 2.54 cm exactly; NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27).
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Bore | in | |
| Stroke | in | |
| Combustion chamber volume | cc | |
| Piston volume (cc): dish or valve reliefs +, dome − | ||
| Head gasket bore | in | |
| Head gasket compressed thickness | in | |
| Deck clearance, piston below deck | in | |
| Swept volume per cylinder | cc | |
| Clearance volume | cc | |
| Static compression ratio (to 1) |
Worked example
| Bore | 4 in |
|---|---|
| Stroke | 3.48 in |
| Combustion chamber volume | 64 cc |
| Piston volume (cc): dish or valve reliefs +, dome − | 5 |
| Head gasket bore | 4.1 in |
| Head gasket compressed thickness | 0.04 in |
| Deck clearance, piston below deck | 0.02 in |
| Swept volume per cylinder (cc) | 716.6 |
|---|---|
| Clearance volume (cc) | 81.8 |
Static compression ratio (to 1) 9.76
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is the compression ratio of a 4.00 × 3.48 in cylinder with a 64 cc chamber, 5 cc dish, 0.040 in gasket of 4.1 in bore and 0.020 in deck?
Swept volume 716.6 cc, clearance volume 81.8 cc, so about 9.76 to 1.
Does a thicker head gasket lower compression?
Yes. It adds clearance volume; going to 0.060 in in the same engine drops the ratio to about 9.32 to 1.