Tire Size Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter two tire sizes as printed on the sidewall, for example 225/65R17, to compare their diameter and what the change does to your speedometer.
Result
New overall diameterin
Current overall diameter (in)
- Current sidewall height (in)
- New sidewall height (in)
- Current revolutions per mile
- New revolutions per mile
- Diameter difference
- True speed when the speedometer shows 60 mph (mph)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
Affiliate link
This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.
KSP Performance sells vehicle parts, including leveling lift kits. Visit KSP Performance
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Current tire width, in mm: enter 100 or more.
- Current aspect ratio, in percent: enter 10 or more.
- Current rim diameter, in in: enter 10 or more.
- New tire width, in mm: enter 100 or more.
- New aspect ratio, in percent: enter 10 or more.
- New rim diameter, in in: enter 10 or more.
- Read the result: New overall diameter; the panel also shows Current overall diameter (in), Current sidewall height (in), New sidewall height (in), Current revolutions per mile, New revolutions per mile, Diameter difference and True speed when the speedometer shows 60 mph (mph).
How this calculator works
In a metric size such as 225/65R17, 225 is the section width in millimeters, 65 the sidewall height as a percent of that width, and 17 the rim diameter in inches. Sidewall (in) = width × aspect ÷ 100 ÷ 25.4; overall diameter = rim + 2 × sidewall.
Revolutions per mile = 63,360 ÷ (π × diameter), since a mile is 63,360 inches. A larger tire turns fewer times per mile, so the speedometer reads low: true speed = shown speed × new diameter ÷ old diameter.
1 in = 2.54 cm and 1 mile = 1,609.344 m exactly (so 63,360 in), NIST SP 811, Appendix B.9 (nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27). Diameters are unloaded, as designed; a loaded tire rolls slightly smaller.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| New tire width | mm | |
| New aspect ratio | % | |
| New rim diameter | in | |
| New overall diameter | in |
Worked example
| Current tire width | 225 mm |
|---|---|
| Current aspect ratio | 65% |
| Current rim diameter | 17 in |
| New tire width | 245 mm |
| New aspect ratio | 70% |
| New rim diameter | 17 in |
| Current overall diameter (in) | 28.5157 |
|---|---|
| Current sidewall height (in) | 5.7579 |
| New sidewall height (in) | 6.752 |
| Current revolutions per mile | 707 |
| New revolutions per mile | 661 |
| Diameter difference | 6.97% |
| True speed when the speedometer shows 60 mph (mph) | 64.1833 |
New overall diameter 30.5039 in
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How tall is a 225/65R17 tire?
About 28.52 in, with a 5.76 in sidewall and about 707 revolutions per mile.
What happens if I go from 225/65R17 to 245/70R17?
The tire is 6.97% taller (30.50 in). At an indicated 60 mph you are doing about 64.2 mph.