Speedometer Gear Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Bigger tires or a new axle ratio throw off a cable-driven speedometer. Enter the old and new setup to find the driven gear that brings it back.
Result
Driven gear to fit (nearest whole tooth)
Driven gear needed (exact teeth)
- Reading at a true 60 mph with the old gear (mph)
- Reading at a true 60 mph with the new gear (mph)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Current driven gear (teeth): enter 1 or more.
- Old tire diameter, in in: enter 1 or more.
- New tire diameter, in in: enter 1 or more.
- Old axle ratio (e.g. 3.73): enter 0.1 or more.
- New axle ratio: enter 0.1 or more.
- Read the result: Driven gear to fit (nearest whole tooth); the panel also shows Driven gear needed (exact teeth), Reading at a true 60 mph with the old gear (mph) and Reading at a true 60 mph with the new gear (mph).
How this calculator works
The speedometer cable turns in proportion to driveshaft turns, which are axle ratio × tire turns. Tire turns per mile vary inversely with tire diameter. To keep the same cable turns per mile: new teeth = old teeth × (new axle ratio ÷ old axle ratio) × (old tire diameter ÷ new tire diameter).
Because the gear must have a whole number of teeth, a small error remains: indicated speed = true speed × exact teeth ÷ teeth fitted.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Current driven gear (teeth) | ||
| Old tire diameter | in | |
| New tire diameter | in | |
| Old axle ratio (e.g. 3.73) | ||
| New axle ratio | ||
| Driven gear needed (exact teeth) | ||
| Driven gear to fit (nearest whole tooth) | ||
round(x, d) | x rounded to d decimal places, or to a whole number without d. |
Worked example
| Current driven gear (teeth) | 20 |
|---|---|
| Old tire diameter | 28 in |
| New tire diameter | 31 in |
| Old axle ratio (e.g. 3.73) | 3.73 |
| New axle ratio | 3.73 |
| Driven gear needed (exact teeth) | 18.0645 |
|---|---|
| Reading at a true 60 mph with the old gear (mph) | 54.1935 |
| Reading at a true 60 mph with the new gear (mph) | 60.2151 |
Driven gear to fit (nearest whole tooth) 18
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What gear do I need going from 28 in to 31 in tires on the same axle?
About 18.06 teeth, so an 18-tooth gear. With the old 20-tooth gear the speedometer shows about 54.2 mph at a true 60.
Does a lower (numerically higher) axle ratio need more teeth?
Yes. The driveshaft turns more per mile, so the driven gear needs more teeth in the same proportion.