Skip to content
FiftyCalc Free calculators for all 50 states

Headphone Power Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the sensitivity and impedance from the headphone's spec sheet and the peak loudness you want.

Result

Sample figures

Power needed (mW)—

Voltage needed (V RMS) —

  • Current needed (mA)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Headphone Power Calculator

Target peak sound level (dB SPL): enter 0 or more. Prefilled example: 110.

Sensitivity is given in: choose dB SPL per milliwatt (dB/mW) or dB SPL per volt (dB/V). Prefilled example: dB SPL per milliwatt (dB/mW).

Sensitivity, in dB: enter a number. Prefilled example: 100.

Impedance, in Ω: enter 0.1 or more. Prefilled example: 32.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Target peak sound level (dB SPL): enter 0 or more.
  2. Sensitivity is given in: choose dB SPL per milliwatt (dB/mW) or dB SPL per volt (dB/V).
  3. Sensitivity, in dB: enter a number.
  4. Impedance, in Ω: enter 0.1 or more.
  5. Read the result: Power needed (mW); the panel also shows Voltage needed (V RMS) and Current needed (mA).

How this calculator works

Decibels are logarithmic: every 10 dB of extra sound needs ten times the power. With sensitivity S in dB/mW, power P (mW) = 10^((SPL − S) ÷ 10). With sensitivity in dB/V, voltage V = 10^((SPL − S) ÷ 20) and P = V² ÷ Z.

Ohm's law links the rest: V = √(P × Z) and current I = V ÷ Z. Compare the result with the amplifier's rated output into the same impedance.

The formula

  1. Mw={10(spl−s)÷10if typ=1(10(spl−s)÷20)2z×1,000otherwise
Symbols used in the formula
SymbolMeaningUnit
splTarget peak sound level (dB SPL)
typSensitivity is given in (1: dB SPL per milliwatt (dB/mW); 2: dB SPL per volt (dB/V))
sSensitivitydB
zImpedanceΩ
MwPower neededmW

Worked example

Target peak sound level (dB SPL)110
Sensitivity is given indB SPL per milliwatt (dB/mW)
Sensitivity100 dB
Impedance32 Ω
Voltage needed (V RMS)0.5657
Current needed (mA)17.6777
  1. Mw=10(110−100)÷10=10

Power needed (mW) 10

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much power do 100 dB/mW, 32-ohm headphones need for 110 dB?

10 mW, which takes about 0.566 V RMS and 17.7 mA.

Why do high-impedance headphones need more voltage?

For the same power, V = √(P × Z): a 300-ohm model needs about three times the voltage of a 32-ohm one at equal sensitivity in dB/mW.

Related calculators