Skip to content
FiftyCalc Free calculators for all 50 states

Attenuation Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Attenuation is the loss of signal strength, given in decibels. Enter the input and output levels and, if you like, the cable length.

Result

Sample figures

Attenuation—dB

Power remaining (%) —

  • Attenuation per unit length (dB)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Attenuation Calculator

Quantity: choose Power (watts, milliwatts…) or Voltage or current (amplitude). Prefilled example: Power (watts, milliwatts…).

Input level: enter 0 or more. Prefilled example: 100.

Output level (same unit): enter 0 or more. Prefilled example: 25.

Cable or path length (optional, 0 if none): enter 0 or more. Prefilled example: 50.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Quantity: choose Power (watts, milliwatts…) or Voltage or current (amplitude).
  2. Input level: enter 0 or more.
  3. Output level (same unit): enter 0 or more.
  4. Cable or path length (optional, 0 if none): enter 0 or more.
  5. Read the result: Attenuation; the panel also shows Power remaining (%) and Attenuation per unit length (dB).

How this calculator works

Attenuation A (dB) = 10 × log₁₀(P_in ÷ P_out) for power, or 20 × log₁₀(V_in ÷ V_out) for voltage or current amplitudes across the same impedance (power goes as the square of amplitude).

A loss of 3 dB leaves about half the power, 10 dB a tenth, 20 dB a hundredth. Dividing by length gives the loss per meter or per foot used in cable datasheets.

The formula

  1. Db=k×log10⁡(pinp)
Symbols used in the formula
SymbolMeaningUnit
kQuantity
pinInput level
pOutput levelsame unit
DbAttenuationdB

Worked example

QuantityPower (watts, milliwatts…)
Input level100
Output level (same unit)25
Cable or path length (optional, 0 if none)50
Power remaining (%)25%
Attenuation per unit length (dB)0.1204
  1. Db=10×log10⁡(10025)=6.0206

Attenuation 6.02 dB

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How many dB is a drop from 100 W to 25 W?

10 × log₁₀(4) ≈ 6.02 dB.

Why is it 20 log for voltage?

Power is proportional to voltage squared, and the square becomes a factor 2 in front of the logarithm.

Related calculators