Skip to content
FiftyCalc Free calculators for all 50 states

Capacitor Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Capacitance grows with the plate area and the dielectric, and falls as the plates move apart. Enter the geometry, the dielectric constant and a voltage.

Result

Sample figures

Capacitance (pF)—

Capacitance (nF) —

  • Charge at that voltage (nC)—

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Capacitor Calculator

Plate area, in cm²: enter 0 or more. Prefilled example: 100.

Gap between the plates, in mm: enter 0 or more. Prefilled example: 0.1.

Relative permittivity εᵣ of the dielectric (1 = vacuum): enter 1 or more. Prefilled example: 1.

Voltage, in V: enter 0 or more. Prefilled example: 10.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Plate area, in cm²: enter 0 or more.
  2. Gap between the plates, in mm: enter 0 or more.
  3. Relative permittivity εᵣ of the dielectric (1 = vacuum): enter 1 or more.
  4. Voltage, in V: enter 0 or more.
  5. Read the result: Capacitance (pF); the panel also shows Capacitance (nF) and Charge at that voltage (nC).

Sources

How this calculator works

C = ε₀ εᵣ A ÷ d, with A the overlapping plate area in m², d the gap in m, εᵣ the relative permittivity of the material between the plates and ε₀ = 8.8541878188 × 10⁻¹² F/m, the vacuum electric permittivity (CODATA 2022 values published by NIST (physics.nist.gov/cuu/Constants, read 2026-10-27)).

The charge is Q = C × V. The formula ignores fringing at the plate edges, which is small when the gap is much smaller than the plates.

The formula

  1. Cpf=0.0000000000088541878188×er×a÷10,000d÷1,000×1,000,000,000,000
Symbols used in the formula
SymbolMeaningUnit
aPlate areacm²
dGap between the platesmm
erRelative permittivity εᵣ of the dielectric (1 = vacuum)
CpfCapacitancepF

Worked example

Plate area100 cm²
Gap between the plates0.1 mm
Relative permittivity εᵣ of the dielectric (1 = vacuum)1
Voltage10 V
Capacitance (nF)0.8854
Charge at that voltage (nC)8.8542
  1. Cpf=0.0000000000088541878188×1×100÷10,0000.1÷1,000×1,000,000,000,000=885.419

Capacitance (pF) 885.4188

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What happens if I fill the gap with a dielectric?

The capacitance is multiplied by its relative permittivity εᵣ.

What is the capacitance of 100 cm² plates 0.1 mm apart in vacuum?

About 885.42 pF, or 0.885 nF.

Related calculators