Capacitors in Series Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Capacitors in series give less capacitance than the smallest one. Enter up to four values in the same unit; leave a box at 0 to skip it.
Result
Total capacitance in series (same unit)
Same capacitors in parallel (same unit)
- Capacitors counted
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- C₁ (any unit, e.g. µF): enter 0 or more.
- C₂ (same unit): enter 0 or more.
- C₃ (0 = not used): enter 0 or more.
- C₄ (0 = not used): enter 0 or more.
- Read the result: Total capacitance in series (same unit); the panel also shows Same capacitors in parallel (same unit) and Capacitors counted.
How this calculator works
In series every capacitor carries the same charge, and the voltages add, so 1 ÷ C_total = 1 ÷ C₁ + 1 ÷ C₂ + … + 1 ÷ Cₙ. For two capacitors this is C₁C₂ ÷ (C₁ + C₂).
In parallel the capacitances simply add. Series wiring is used to raise the voltage rating; the voltage then divides in inverse proportion to each capacitance.
Worked example
| C₁ (any unit, e.g. µF) | 10 |
|---|---|
| C₂ (same unit) | 22 |
| C₃ (0 = not used) | 0 |
| C₄ (0 = not used) | 0 |
| Total capacitance in series (same unit) | 6.875 |
|---|---|
| Same capacitors in parallel (same unit) | 32 |
| Capacitors counted | 2 |
Frequently asked questions
What is 10 µF in series with 22 µF?
10 × 22 ÷ 32 = 6.875 µF.
Why is the series total smaller than each part?
Putting capacitors in series is like widening the gap between the plates, which lowers capacitance.