Skip to content
FiftyCalc Free calculators for all 50 states

Speaker Crossover Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

A passive crossover sends highs to the tweeter (through a capacitor) and lows to the woofer (through an inductor). Enter the nominal impedance and the crossover point.

Result

Sample figures

Capacitor—µF

Inductor (mH) —

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Speaker Crossover Calculator

Driver nominal impedance, in Ω: enter 0.1 or more. Prefilled example: 8.

Crossover frequency, in Hz: enter 1 or more. Prefilled example: 2,500.

Filter order: choose First order (6 dB/octave) or Second-order Butterworth (12 dB/octave). Prefilled example: First order (6 dB/octave).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Driver nominal impedance, in Ω: enter 0.1 or more.
  2. Crossover frequency, in Hz: enter 1 or more.
  3. Filter order: choose First order (6 dB/octave) or Second-order Butterworth (12 dB/octave).
  4. Read the result: Capacitor; the panel also shows Inductor (mH).

How this calculator works

First order: C = 1 ÷ (2π f R) in series with the tweeter and L = R ÷ (2π f) in series with the woofer. Second-order Butterworth (Q = 0.707): C = 1 ÷ (2√2 π f R) and L = √2 R ÷ (2π f) in each section, the tweeter's high-pass made of C in series and L across it, the woofer's low-pass of L in series and C across it.

R is the driver's impedance treated as a pure resistance. Real drivers vary with frequency, so designs often add an impedance-compensation network.

The formula

  1. C={1,000,0002×π×f×rif o=11,000,0002×2×π×f×rotherwise
Symbols used in the formula
SymbolMeaningUnit
rDriver nominal impedanceΩ
fCrossover frequencyHz
oFilter order (1: First order (6 dB/octave); 2: Second-order Butterworth (12 dB/octave))
CCapacitorµF

Worked example

Driver nominal impedance8 Ω
Crossover frequency2,500 Hz
Filter orderFirst order (6 dB/octave)
Inductor (mH)0.5093
  1. C=1,000,0002×3.14159×2,500×8=7.95775

Capacitor 7.9577 µF

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What parts make a first-order 2,500 Hz crossover for 8 ohms?

About 7.96 µF for the tweeter and 0.509 mH for the woofer.

Why does the tweeter get a capacitor?

A capacitor's reactance falls with frequency, so it passes highs and blocks the lows that could damage a tweeter.

Related calculators