Skip to content
FiftyCalc Free calculators for all 50 states

Current Divider Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

In parallel branches, more current takes the path of lower resistance. Enter the total current and the two resistances.

Result

Sample figures

Current through R₁—A

Current through R₂ (A) —

  • Equivalent resistance (ohms)—
  • Voltage across the pair (V)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Current Divider Calculator

Total current, in A: enter 0 or more. Prefilled example: 1.

Resistance R₁, in Ω: enter 0.0001 or more. Prefilled example: 100.

Resistance R₂, in Ω: enter 0.0001 or more. Prefilled example: 300.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Total current, in A: enter 0 or more.
  2. Resistance R₁, in Ω: enter 0.0001 or more.
  3. Resistance R₂, in Ω: enter 0.0001 or more.
  4. Read the result: Current through R₁; the panel also shows Current through R₂ (A), Equivalent resistance (ohms) and Voltage across the pair (V).

How this calculator works

Current divider rule for two parallel resistors: I₁ = I × R₂ ÷ (R₁ + R₂) and I₂ = I × R₁ ÷ (R₁ + R₂). Each branch carries the same voltage V = I × R_eq, with R_eq = R₁R₂ ÷ (R₁ + R₂).

It follows from Ohm's law and Kirchhoff's current law: the branch currents add up to the total.

The formula

  1. I1=i×r2r1+r2
Symbols used in the formula
SymbolMeaningUnit
iTotal currentA
r1Resistance R₁Ω
r2Resistance R₂Ω
I1Current through R₁A

Worked example

Total current1 A
Resistance R₁100 Ω
Resistance R₂300 Ω
Current through R₂ (A)0.25
Equivalent resistance (ohms)75
Voltage across the pair (V)75
  1. I1=1×300100+300=0.75

Current through R₁ 0.75 A

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How does 1 A split between 100 Ω and 300 Ω?

0.75 A goes through 100 Ω and 0.25 A through 300 Ω.

Why does the formula use the other resistor?

A branch's share is proportional to its conductance (1 ÷ R), which for two branches works out to the opposite resistance over the sum.

Related calculators