Skip to content
FiftyCalc Free calculators for all 50 states

Cutoff Frequency Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

At the cutoff frequency the output of a first-order filter falls to 70.7% of the input (−3 dB). Pick RC or RL and enter the parts.

Result

Sample figures

Cutoff frequency—Hz

Angular cutoff frequency (rad/s) —

  • Time constant (ms)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Cutoff Frequency Calculator

Filter type: choose RC (resistor and capacitor) or RL (resistor and inductor). Prefilled example: RC (resistor and capacitor).

Resistance, in Ω: enter 0.0001 or more. Prefilled example: 1,000.

Capacitance for RC, in µF: enter 0 or more. Prefilled example: 0.1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Filter type: choose RC (resistor and capacitor) or RL (resistor and inductor).
  2. Resistance, in Ω: enter 0.0001 or more.
  3. Capacitance for RC, in µF: enter 0 or more.
  4. Inductance for RL, in mH: enter 0 or more.
  5. Read the result: Cutoff frequency; the panel also shows Angular cutoff frequency (rad/s) and Time constant (ms).

How this calculator works

RC filter: fc = 1 ÷ (2π R C), time constant τ = R C. RL filter: fc = R ÷ (2π L), τ = L ÷ R. In both, fc = 1 ÷ (2π τ).

The same cutoff applies to the low-pass and the high-pass arrangement; above (or below) it the response falls at 20 dB per decade.

The formula

  1. F={12×π×r×cuf÷1,000,000if t=1r2×π×lmh÷1,000otherwise
Symbols used in the formula
SymbolMeaningUnit
tFilter type (1: RC (resistor and capacitor); 2: RL (resistor and inductor))
rResistanceΩ
cufCapacitance for RCµF
lmhInductance for RLmH
FCutoff frequencyHz

Worked example

Filter typeRC (resistor and capacitor)
Resistance1,000 Ω
Capacitance for RC0.1 µF
Angular cutoff frequency (rad/s)10,000
Time constant (ms)0.1
  1. F=12×3.14159×1,000×0.1÷1,000,000=1,591.55

Cutoff frequency 1,591.5494 Hz

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the cutoff of 1 kΩ and 0.1 µF?

fc = 1 ÷ (2π × 1,000 × 0.0000001) ≈ 1,591.55 Hz.

Why −3 dB?

At fc the reactance equals the resistance, so the output voltage is 1 ÷ √2 of the input, which is half the power, or −3.01 dB.

Related calculators