Forward Converter Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the input voltage, the duty cycle and the transformer turns ratio (secondary ÷ primary).
Result
Output voltageV
Duty cycle for the target output (%)
- Switch voltage with a 1:1 reset winding (V)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Input voltage, in V: enter 0 or more.
- Duty cycle, in percent: enter a number from 0 to 99.
- Turns ratio Ns ÷ Np: enter 0 or more.
- Target output voltage, in V: enter 0 or more.
- Read the result: Output voltage; the panel also shows Duty cycle for the target output (%) and Switch voltage with a 1:1 reset winding (V).
How this calculator works
Ideal forward converter in continuous conduction: V_out = V_in × (Ns ÷ Np) × D. It works like a buck converter behind a transformer.
With a reset winding of as many turns as the primary, the core resets only if D stays at or below 50%, and the switch sees twice the input voltage. Diode drops and losses are ignored.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Input voltage | V | |
| Duty cycle | % | |
| Turns ratio Ns ÷ Np | ||
| Output voltage | V |
Worked example
| Input voltage | 48 V |
|---|---|
| Duty cycle | 40% |
| Turns ratio Ns ÷ Np | 0.5 |
| Target output voltage | 12 V |
| Duty cycle for the target output (%) | 50% |
|---|---|
| Switch voltage with a 1:1 reset winding (V) | 96.00 |
Output voltage 9.60 V
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What does a 48 V forward converter at 40% duty and Ns/Np = 0.5 give?
9.60 V; a 12 V output needs a duty cycle of 50%.
How is it different from a flyback?
A forward converter passes energy while the switch is on and uses an output inductor; a flyback stores energy in the transformer and releases it when the switch turns off.