Fuel Pump Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the horsepower you plan to make, the engine's BSFC and a margin for pressure and voltage drop at the pump.
Result
Pump flow needed (US gal/hr)
Pump flow needed (L/hr)
- Fuel flow needed (lb/hr)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Target power (at the crank), in hp: enter 0 or more.
- BSFC (lb/hp·h, from your engine builder; example): enter 0 or more.
- Safety margin, in percent: enter 0 or more.
- Fuel density (lb/gal, example for gasoline): enter 0 or more.
- Read the result: Pump flow needed (US gal/hr); the panel also shows Fuel flow needed (lb/hr) and Pump flow needed (L/hr).
How this calculator works
Fuel flow = horsepower × BSFC × (1 + margin). Gallons per hour = lb/hr ÷ fuel density; liters per hour = gallons × 3.785412 (NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9, read 2026-10-27)).
Pumps are rated at a given pressure and voltage, and deliver less at higher pressure (boost-referenced regulators raise it under boost). Check the flow on the pump maker's chart at your real pressure. The density default is an example within the range of the U.S. Department of Energy (EERE) table "Properties of Fuels", gasoline density 6.0–6.5 lb/gal at 60 °F, as reproduced at https://www.BuildItSolar.com/References/EEREfueltable.pdf (read 2026-10-27).
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Target power (at the crank) | hp | |
| BSFC (lb/hp·h, from your engine builder; example) | ||
| Safety margin | % | |
| Fuel density (lb/gal, example for gasoline) | ||
| Fuel flow needed (lb/hr) | ||
| Pump flow needed (US gal/hr) |
Worked example
| Target power (at the crank) | 500 hp |
|---|---|
| BSFC (lb/hp·h, from your engine builder; example) | 0.5 |
| Safety margin | 20% |
| Fuel density (lb/gal, example for gasoline) | 6 |
| Fuel flow needed (lb/hr) | 300 |
|---|---|
| Pump flow needed (L/hr) | 189 |
Pump flow needed (US gal/hr) 50.0
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What pump flow does a 500 hp engine with BSFC 0.5 need, with a 20% margin?
300 lb/hr, which is 50.0 gallons (189 liters) per hour of gasoline at 6.0 lb/gal.
Why add a margin?
The pump's flow falls with pressure and voltage, and the return line must keep flowing so the regulator can hold pressure.