Skip to content
FiftyCalc Free calculators for all 50 states

Generator Power Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Choose the number of phases, then enter the voltage, the current and the power factor of the load.

Result

Sample figures

Real power—kW

Apparent power (kVA) —

  • Reactive power (kVAR)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Generator Power Calculator

Phases

Phases: choose Single-phase or Three-phase. Prefilled example: Single-phase.

Voltage (line-to-line for three-phase), in V: enter 0 or more. Prefilled example: 240.

Current, in A: enter 0 or more. Prefilled example: 40.

Power factor (1 for resistive loads): enter a number from 0 to 1. Prefilled example: 0.8.

Affiliate link

This is an affiliate link: FiftyCalc may earn a commission if you buy through it. This does not change the result.

ALLPOWERS sells portable power stations and portable solar panels. Visit ALLPOWERS

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Phases: choose Single-phase or Three-phase.
  2. Voltage (line-to-line for three-phase), in V: enter 0 or more.
  3. Current, in A: enter 0 or more.
  4. Power factor (1 for resistive loads): enter a number from 0 to 1.
  5. Read the result: Real power; the panel also shows Apparent power (kVA) and Reactive power (kVAR).

How this calculator works

Single-phase: S = V × I. Three-phase: S = √3 × V_LL × I. Real power P = S × power factor and reactive power Q = S × √(1 − pf²). Generators are rated in kVA because their current limit does not depend on the power factor.

Motors draw several times their running current when starting, so size a generator with a margin for the largest motor load.

The formula

  1. Kva=V×I×{3if ph=31otherwise1,000
  2. Kw=Kva×pf
Symbols used in the formula
SymbolMeaningUnit
phPhases (1: Single-phase; 3: Three-phase)
VVoltage (line-to-line for three-phase)V
ICurrentA
pfPower factor (1 for resistive loads)
KvaApparent power (kVA)
KwReal powerkW

Worked example

PhasesSingle-phase
Voltage (line-to-line for three-phase)240 V
Current40 A
Power factor (1 for resistive loads)0.8
Apparent power (kVA)9.60
Reactive power (kVAR)5.76
  1. Kva=240×40×11,000=9.6
  2. Kw=9.6×0.8=7.68

Real power 7.68 kW

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What power is 40 A at 240 V single-phase with a 0.8 power factor?

9.60 kVA of apparent power and 7.68 kW of real power.

Why is √3 used for three-phase?

Three-phase power summed over the phases equals √3 × line-to-line voltage × line current.

Related calculators