Skip to content
FiftyCalc Free calculators for all 50 states

High Pass Filter Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the resistor and capacitor values, and a signal frequency to see how much it is attenuated.

Result

Sample figures

Cutoff frequency −3 dB—Hz

Time constant RC (ms) —

  • Gain at the signal frequency (V_out ÷ V_in)—
  • Gain (dB)—
  • Phase lead (degrees)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

High Pass Filter Calculator

Resistance, in kΩ: enter 0 or more. Prefilled example: 10.

Capacitance, in nF: enter 0 or more. Prefilled example: 100.

Signal frequency, in Hz: enter 0 or more. Prefilled example: 50.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Resistance, in kΩ: enter 0 or more.
  2. Capacitance, in nF: enter 0 or more.
  3. Signal frequency, in Hz: enter 0 or more.
  4. Read the result: Cutoff frequency −3 dB; the panel also shows Time constant RC (ms), Gain at the signal frequency (V_out ÷ V_in), Gain (dB) and Phase lead (degrees).

How this calculator works

First-order RC high-pass filter: f_c = 1 ÷ (2π R C). At frequency f the gain is |H| = (f/f_c) ÷ √(1 + (f/f_c)²) and the output leads the input by atan(f_c ÷ f).

At the cutoff the gain is 1/√2 (−3.01 dB) and the phase lead 45°. Below it the response falls by 20 dB per decade. The load connected to the output must be much larger than R.

The formula

  1. Fc=12×π×R×1,000×Cn×0.000000001
Symbols used in the formula
SymbolMeaningUnit
RResistancekΩ
CnCapacitancenF
FcCutoff frequency −3 dBHz

Worked example

Resistance10 kΩ
Capacitance100 nF
Signal frequency50 Hz
Time constant RC (ms)1
Gain at the signal frequency (V_out ÷ V_in)0.2997
Gain (dB)-10.47
Phase lead (degrees)72.56
  1. Fc=12×3.14159×10×1,000×100×0.000000001=159.155

Cutoff frequency −3 dB 159.15 Hz

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the cutoff of 10 kΩ and 100 nF?

About 159.15 Hz; a 50 Hz signal is cut to about 0.2997 of its amplitude (−10.47 dB).

How do I lower the cutoff?

Increase R or C: the cutoff is inversely proportional to their product.

Related calculators