Impedance Matching Calculator (L-Network)
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the source and load resistances and the frequency to get the inductor and capacitor of a two-element L-match.
Result
Series inductor, on the low-resistance side (nH)
Higher resistance (Ω)
- Lower resistance (Ω)
- Network Q
- Series reactance (Ω)
- Shunt reactance (Ω)
- Shunt capacitor, across the high-resistance side (pF)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Source resistance, in Ω: enter 0.001 or more.
- Load resistance, in Ω: enter 0.001 or more.
- Frequency, in MHz: enter 1e-06 or more.
- Read the result: Series inductor, on the low-resistance side (nH); the panel also shows Higher resistance (Ω), Lower resistance (Ω), Network Q, Series reactance (Ω), Shunt reactance (Ω) and Shunt capacitor, across the high-resistance side (pF).
How this calculator works
For two resistances R_high and R_low, the L-network Q is fixed: Q = √(R_high ÷ R_low − 1). The series element has reactance X_s = Q × R_low and the shunt element X_p = R_high ÷ Q.
In the low-pass version the series element is an inductor, L = X_s ÷ (2πf), and the shunt element a capacitor, C = 1 ÷ (2πf × X_p). The shunt capacitor sits across the higher resistance.
The match is exact only at the design frequency and only for purely resistive source and load; complex loads need their reactance absorbed first.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Source resistance | Ω | |
| Load resistance | Ω | |
| Frequency | MHz | |
| Higher resistance | Ω | |
| Lower resistance | Ω | |
| Network Q | ||
| Series reactance | Ω | |
| Series inductor, on the low-resistance side | nH | |
max(a, b, …) | the largest of the values. | |
min(a, b, …) | the smallest of the values. |
Worked example
| Source resistance | 50 Ω |
|---|---|
| Load resistance | 200 Ω |
| Frequency | 10 MHz |
| Network Q | 1.7321 |
|---|---|
| Series reactance (Ω) | 86.6025 |
| Shunt reactance (Ω) | 115.4701 |
| Shunt capacitor, across the high-resistance side (pF) | 137.8322 |
Series inductor, on the low-resistance side (nH) 1,378.3222
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How do I match 50 Ω to 200 Ω at 10 MHz?
Q = √3 ≈ 1.732: a 1,378 nH series inductor on the 50 Ω side and a 137.8 pF capacitor across the 200 Ω side.
Can I choose the Q of an L-network?
No. With two elements the Q is set by the resistance ratio; a pi or T network adds a third element to choose Q.