Skip to content
FiftyCalc Free calculators for all 50 states

Inverting Buck-Boost Converter Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Size an inverting buck-boost converter: duty cycle for the output voltage you want, average and peak inductor current, and ripple.

Result

Sample figures

Duty cycle D—

Average inductor current (A) —

  • Inductor ripple current, peak to peak (A)—
  • Peak inductor and switch current (A)—
  • Voltage across the switch when off (V)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Inverting Buck-Boost Converter Calculator

Input voltage, in V: enter 0 or more. Prefilled example: 12.

Output voltage magnitude (output is negative), in V: enter 0 or more. Prefilled example: 5.

Output current, in A: enter 0 or more. Prefilled example: 1.

Switching frequency, in kHz: enter 0 or more. Prefilled example: 200.

Inductance, in µH: enter 0 or more. Prefilled example: 22.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Input voltage, in V: enter 0 or more.
  2. Output voltage magnitude (output is negative), in V: enter 0 or more.
  3. Output current, in A: enter 0 or more.
  4. Switching frequency, in kHz: enter 0 or more.
  5. Inductance, in µH: enter 0 or more.
  6. Read the result: Duty cycle D; the panel also shows Average inductor current (A), Inductor ripple current, peak to peak (A), Peak inductor and switch current (A) and Voltage across the switch when off (V).

How this calculator works

Inverting buck-boost in continuous conduction (ideal switch and diode): V_out = −V_in × D ÷ (1 − D), so the duty cycle for an output of magnitude |V_out| is D = |V_out| ÷ (V_in + |V_out|). Below D = 50% it steps down, above it steps up.

Average inductor current I_L = I_out ÷ (1 − D); ripple ΔI = V_in × D ÷ (f_s × L); peak current = I_L + ΔI ÷ 2. The switch and diode must withstand V_in + |V_out|.

Real converters need a slightly higher duty cycle to cover diode and switch drops.

The formula

  1. D=vvin+v×100
Symbols used in the formula
SymbolMeaningUnit
vinInput voltageV
vOutput voltage magnitude (output is negative)V
DDuty cycle D%

Worked example

Input voltage12 V
Output voltage magnitude (output is negative)5 V
Output current1 A
Switching frequency200 kHz
Inductance22 µH
Average inductor current (A)1.4167
Inductor ripple current, peak to peak (A)0.8021
Peak inductor and switch current (A)1.8177
Voltage across the switch when off (V)17
  1. D=512+5×100=29.4118

Duty cycle D 29.41%

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why is the output negative?

The inductor discharges into the output through a diode pointing the other way, so the output is referenced below ground.

What duty cycle gives −12 V from 12 V?

50%: at D = 0.5 the output magnitude equals the input.

Related calculators