Skip to content
FiftyCalc Free calculators for all 50 states

J-Pole Antenna Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Get starting lengths for a J-pole: the half-wave radiator and the quarter-wave matching section, from the frequency you want.

Result

Sample figures

Half-wave radiator—in

Free-space wavelength (in) —

  • Quarter-wave matching stub (in)—
  • Total length, radiator + stub (in)—
  • Half-wave radiator (cm)—

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

J-Pole Antenna Calculator

Frequency, in MHz: enter 0 or more. Prefilled example: 146.

Shortening (velocity) factor: enter a number from 0 to 1. Prefilled example: 0.95.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Frequency, in MHz: enter 0 or more.
  2. Shortening (velocity) factor: enter a number from 0 to 1.
  3. Read the result: Half-wave radiator; the panel also shows Free-space wavelength (in), Quarter-wave matching stub (in), Total length, radiator + stub (in) and Half-wave radiator (cm).

Sources

How this calculator works

A J-pole is an end-fed half-wave radiator matched by a quarter-wave stub. The free-space wavelength is λ = c ÷ f, with c = 299,792,458 m/s (CODATA 2022 values from NIST (physics.nist.gov/cuu/Constants/Table/allascii.txt, read October 27, 2026)); 1 in = 0.0254 m.

Radiator = λ/2 × k and stub = λ/4 × k, where k is a shortening factor for the conductor's thickness and end effects (and the line's velocity factor if the stub is made of twin-lead). The default 0.95 is an example; builders trim the final lengths with an SWR meter.

These are starting lengths, not a guarantee of a match: the feed-point tap position on the stub is found by adjustment.

The formula

  1. λ=299.792458÷f0.0254
  2. Rad=λ2×k
Symbols used in the formula
SymbolMeaningUnit
fFrequencyMHz
kShortening (velocity) factor
λFree-space wavelengthin
RadHalf-wave radiatorin

Worked example

Frequency146 MHz
Shortening (velocity) factor0.95
Free-space wavelength (in)80.8415
Quarter-wave matching stub (in)19.1998
Total length, radiator + stub (in)57.5995
Half-wave radiator (cm)97.5352
  1. λ=299.792458÷1460.0254=80.8415
  2. Rad=80.84152×0.95=38.3997

Half-wave radiator 38.3997 in

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Why multiply by a shortening factor?

Real conductors have a finite thickness and end effects, so they resonate slightly shorter than the free-space half wavelength.

Where does the coax connect?

Near the shorted end of the quarter-wave stub, at a tap point moved up or down until the SWR is lowest.

Related calculators