Skip to content
FiftyCalc Free calculators for all 50 states

LC Filter Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Find the cutoff frequency and characteristic impedance of a second-order LC low-pass or high-pass filter.

Result

Sample figures

Cutoff frequency—Hz

Cutoff frequency (kHz) —

  • Angular frequency ω (rad/s)—
  • Characteristic impedance √(L/C) (ohms)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

LC Filter Calculator

Inductance: enter 0 or more. Prefilled example: 10.

Inductance unit

Inductance unit: choose Henries (H), Millihenries (mH) or Microhenries (µH). Prefilled example: Microhenries (µH).

Capacitance: enter 0 or more. Prefilled example: 1.

Capacitance unit

Capacitance unit: choose Microfarads (µF), Nanofarads (nF) or Picofarads (pF). Prefilled example: Microfarads (µF).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Inductance: enter 0 or more.
  2. Inductance unit: choose Henries (H), Millihenries (mH) or Microhenries (µH).
  3. Capacitance: enter 0 or more.
  4. Capacitance unit: choose Microfarads (µF), Nanofarads (nF) or Picofarads (pF).
  5. Read the result: Cutoff frequency; the panel also shows Cutoff frequency (kHz), Angular frequency ω (rad/s) and Characteristic impedance √(L/C) (ohms).

How this calculator works

The cutoff of an LC filter is its resonant frequency f = 1 ÷ (2π × √(L × C)), where the inductive and capacitive reactances are equal.

Characteristic impedance Z₀ = √(L ÷ C): a filter loaded by about this resistance gives a flat (Butterworth-like) response; a lighter load produces a peak near the cutoff. Beyond the cutoff the response falls about 40 dB per decade.

The formula

  1. F=12×π×l×lu×c×cu
Symbols used in the formula
SymbolMeaningUnit
lInductance
luInductance unit
cCapacitance
cuCapacitance unit
FCutoff frequencyHz

Worked example

Inductance10
Inductance unitMicrohenries (µH)
Capacitance1
Capacitance unitMicrofarads (µF)
Cutoff frequency (kHz)50.3292
Angular frequency ω (rad/s)316,227.766
Characteristic impedance √(L/C) (ohms)3.1623
  1. F=12×3.14159×10×0.000001×1×0.000001=50,329.21

Cutoff frequency 50,329.2121 Hz

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the cutoff of 10 µH with 1 µF?

About 50,329 Hz (50.33 kHz).

Low-pass or high-pass: is the formula different?

No. A series L with shunt C is low-pass and a series C with shunt L is high-pass; both have the same cutoff frequency.

Related calculators