Skip to content
FiftyCalc Free calculators for all 50 states

Pi Attenuator Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Enter the attenuation and the system impedance to get the resistor values of a symmetrical pi pad.

Result

Sample figures

Shunt resistors R1 = R3—Ω

Voltage ratio K —

  • Series resistor R2 (Ω)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Pi Attenuator Calculator

Attenuation, in dB: enter 0.01 or more. Prefilled example: 10.

System impedance Z₀, in Ω: enter 0.001 or more. Prefilled example: 50.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Attenuation, in dB: enter 0.01 or more.
  2. System impedance Z₀, in Ω: enter 0.001 or more.
  3. Read the result: Shunt resistors R1 = R3; the panel also shows Voltage ratio K and Series resistor R2 (Ω).

How this calculator works

For a symmetrical pi pad matched to Z₀ on both sides, with K = 10^(A ÷ 20): each shunt resistor = Z₀ × (K + 1) ÷ (K − 1) and the series resistor = Z₀ × (K² − 1) ÷ (2K).

Standard resistor values rarely match exactly; pick the nearest and check the resulting attenuation and return loss.

The formula

  1. K=10A÷20
  2. Sh=Z×(K+1)K−1
Symbols used in the formula
SymbolMeaningUnit
AAttenuationdB
ZSystem impedance Z₀Ω
KVoltage ratio K
ShShunt resistors R1 = R3Ω

Worked example

Attenuation10 dB
System impedance Z₀50 Ω
Voltage ratio K3.1623
Series resistor R2 (Ω)71.1512
  1. K=1010÷20=3.16228
  2. Sh=50×(3.16228+1)3.16228−1=96.2475

Shunt resistors R1 = R3 96.2475 Ω

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What resistors make a 10 dB, 50 Ω pi attenuator?

Two 96.25 Ω shunt resistors and one 71.15 Ω series resistor.

What is K for 6 dB?

K = 10^(6 ÷ 20) ≈ 1.9953, a voltage ratio of about 2.

Related calculators