Skip to content
FiftyCalc Free calculators for all 50 states

Pulse per Mile Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the tire diameter, the rear axle (final drive) ratio and the speed sensor's pulses per driveshaft revolution (from the sensor or transmission specs).

Result

Sample figures

Pulses per mile—

Tire revolutions per mile —

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Pulse per Mile Calculator

Units: switches the fields between the two unit systems.

Tire diameter, in in: enter 1 or more. Prefilled example: 28.

Axle ratio (e.g. 3.73): enter 0.1 or more. Prefilled example: 3.73.

Sensor pulses per driveshaft revolution: enter 1 or more. Prefilled example: 8.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Tire diameter, in in: enter 1 or more.
  3. Axle ratio (e.g. 3.73): enter 0.1 or more.
  4. Sensor pulses per driveshaft revolution: enter 1 or more.
  5. Read the result: Pulses per mile; the panel also shows Tire revolutions per mile.

How this calculator works

A tire rolls its circumference, π × diameter, per turn. A mile is 63,360 inches (5,280 ft × 12), so tire revolutions per mile = 63,360 ÷ (π × D).

The driveshaft turns axle-ratio times per wheel turn, so pulses per mile = tire revolutions per mile × axle ratio × sensor pulses per driveshaft revolution. Use the loaded tire diameter for the most accurate figure.

The formula

  1. Rev=63,360π×D
  2. Ppm=Rev×ax×pr
Symbols used in the formula
SymbolMeaningUnit
DTire diameterin
axAxle ratio (e.g. 3.73)
prSensor pulses per driveshaft revolution
RevTire revolutions per mile
PpmPulses per mile

Worked example

Tire diameter28 in
Axle ratio (e.g. 3.73)3.73
Sensor pulses per driveshaft revolution8
Tire revolutions per mile720.2898
  1. Rev=63,3603.14159×28=720.29
  2. Ppm=720.29×3.73×8=21,493.45

Pulses per mile 21,493

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What are the pulses per mile for 28-inch tires, 3.73 gears and an 8-pulse sensor?

About 720.29 tire turns per mile × 3.73 × 8 ≈ 21,493 pulses per mile.

Why does changing tire size upset the speedometer?

Bigger tires make fewer turns per mile, so fewer pulses per mile reach the gauge and it reads slow unless recalibrated.

Related calculators