Skip to content
FiftyCalc Free calculators for all 50 states

RC Filter Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

A resistor and a capacitor make the simplest filter. Enter R and C, the filter type and a frequency to check.

Result

Sample figures

Cutoff frequency, −3 dB—Hz

Gain at that frequency (Vout/Vin) —

  • Gain (dB)—
  • Phase shift (degrees)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

RC Filter Calculator

Resistance: enter 0 or more. Prefilled example: 1.

Resistance unit

Resistance unit: choose ohms (Ω), kilohms (kΩ) or megohms (MΩ). Prefilled example: kilohms (kΩ).

Capacitance: enter 0 or more. Prefilled example: 100.

Capacitance unit

Capacitance unit: choose microfarads (µF), nanofarads (nF) or picofarads (pF). Prefilled example: nanofarads (nF).

Filter type

Filter type: choose Low-pass or High-pass. Prefilled example: Low-pass.

Signal frequency to check, in Hz: enter 0 or more. Prefilled example: 1,000.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Resistance: enter 0 or more.
  2. Resistance unit: choose ohms (Ω), kilohms (kΩ) or megohms (MΩ).
  3. Capacitance: enter 0 or more.
  4. Capacitance unit: choose microfarads (µF), nanofarads (nF) or picofarads (pF).
  5. Filter type: choose Low-pass or High-pass.
  6. Signal frequency to check, in Hz: enter 0 or more.
  7. Read the result: Cutoff frequency, −3 dB; the panel also shows Gain at that frequency (Vout/Vin), Gain (dB) and Phase shift (degrees).

How this calculator works

Cutoff frequency f_c = 1 ÷ (2π R C), where the output is 1/√2 of the input (−3.01 dB). For a first-order low-pass filter the gain is 1 ÷ √(1 + (f/f_c)²) and the phase −atan(f/f_c); for a high-pass, (f/f_c) ÷ √(1 + (f/f_c)²) and 90° − atan(f/f_c).

Far beyond the cutoff the response falls by 20 dB per decade. The formulas assume an ideal source and a load that draws no current; a load resistance changes the result.

The formula

  1. Fc=12×π×r×ru×c×cu
Symbols used in the formula
SymbolMeaningUnit
rResistance
ruResistance unit
cCapacitance
cuCapacitance unit
FcCutoff frequency, −3 dBHz

Worked example

Resistance1
Resistance unitkilohms (kΩ)
Capacitance100
Capacitance unitnanofarads (nF)
Filter typeLow-pass
Signal frequency to check1,000 Hz
Gain at that frequency (Vout/Vin)0.8467
Gain (dB)-1.4451
Phase shift (degrees)-32.1419
  1. Fc=12×3.14159×1×1,000×100×0.000000001=1,591.55

Cutoff frequency, −3 dB 1,591.5494 Hz

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the cutoff of 1 kΩ and 100 nF?

About 1,591.55 Hz.

How much does a low-pass RC filter attenuate at its cutoff?

The gain is about 0.7071, or −3.01 dB, with a 45° phase lag.

Related calculators