Resistor Voltage Drop Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
In a series circuit the supply voltage is shared among the resistors in proportion to their resistance. Enter the supply and the resistor values.
Result
Voltage drop across R₁V
Total resistance (Ω)
- Current (mA)
- Voltage drop across R₂ (V)
- Voltage drop across R₃ (V)
- Total power (W)
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Supply voltage, in V: enter 0 or more.
- R₁, in Ω: enter 0 or more.
- R₂, in Ω: enter 0 or more.
- R₃ (0 if unused), in Ω: enter 0 or more.
- Read the result: Voltage drop across R₁; the panel also shows Total resistance (Ω), Current (mA), Voltage drop across R₂ (V), Voltage drop across R₃ (V) and Total power (W).
How this calculator works
In series the same current flows through every resistor: I = V_s ÷ (R₁ + R₂ + R₃). By Ohm's law each drop is V_k = I × R_k = V_s × R_k ÷ R_total, and the drops add up to the supply voltage (Kirchhoff's voltage law).
Total power P = V_s² ÷ R_total. Wire and source resistance are ignored; for the drop along a long cable, use a wire voltage drop calculator.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Supply voltage | V | |
| R₁ | Ω | |
| R₂ | Ω | |
| R₃ (0 if unused) | Ω | |
| Total resistance | Ω | |
| Voltage drop across R₁ | V |
Worked example
| Supply voltage | 12 V |
|---|---|
| R₁ | 100 Ω |
| R₂ | 220 Ω |
| R₃ (0 if unused) | 0 Ω |
| Total resistance (Ω) | 320 |
|---|---|
| Current (mA) | 37.5 |
| Voltage drop across R₂ (V) | 8.25 |
| Voltage drop across R₃ (V) | 0 |
| Total power (W) | 0.45 |
Voltage drop across R₁ 3.75 V
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What are the drops across 100 Ω and 220 Ω in series on 12 V?
3.75 V and 8.25 V, with 37.5 mA flowing.
Does the largest resistor get the largest voltage drop?
Yes, in a series circuit the drops are proportional to the resistances.