Skip to content
FiftyCalc Free calculators for all 50 states

RLC Circuit Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

A series RLC circuit resonates like an LC circuit, with the resistor setting how sharp the resonance is. Enter R, L and C.

Result

Sample figures

Resonant frequency—Hz

Quality factor Q —

  • Bandwidth, −3 dB (Hz)—
  • Damping ratio ζ—
  • Response—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

RLC Circuit Calculator

Resistance, in Ω: enter 0 or more. Prefilled example: 10.

Inductance: enter 0 or more. Prefilled example: 10.

Inductance unit

Inductance unit: choose microhenries (µH), millihenries (mH) or henries (H). Prefilled example: millihenries (mH).

Capacitance: enter 0 or more. Prefilled example: 1.

Capacitance unit

Capacitance unit: choose microfarads (µF), nanofarads (nF) or picofarads (pF). Prefilled example: microfarads (µF).

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Resistance, in Ω: enter 0 or more.
  2. Inductance: enter 0 or more.
  3. Inductance unit: choose microhenries (µH), millihenries (mH) or henries (H).
  4. Capacitance: enter 0 or more.
  5. Capacitance unit: choose microfarads (µF), nanofarads (nF) or picofarads (pF).
  6. Read the result: Resonant frequency; the panel also shows Quality factor Q, Bandwidth, −3 dB (Hz), Damping ratio ζ and Response.

How this calculator works

Series RLC: resonant frequency f₀ = 1 ÷ (2π √(L C)); quality factor Q = (1/R) √(L ÷ C); bandwidth between the −3 dB points B = f₀ ÷ Q; damping ratio ζ = (R/2) √(C ÷ L) = 1 ÷ (2Q).

ζ < 1 means an underdamped circuit that rings after a step, ζ = 1 critical damping (fastest settling without overshoot) and ζ > 1 overdamping. Component resistance (inductor wire, capacitor ESR) adds to R.

The formula

  1. F0=12×π×l×lu×c×cu
Symbols used in the formula
SymbolMeaningUnit
lInductance
luInductance unit
cCapacitance
cuCapacitance unit
F0Resonant frequencyHz

Worked example

Resistance10 Ω
Inductance10
Inductance unitmillihenries (mH)
Capacitance1
Capacitance unitmicrofarads (µF)
Quality factor Q10
Bandwidth, −3 dB (Hz)159.1549
Damping ratio ζ0.05
ResponseUnderdamped (rings before settling)
  1. F0=12×3.14159×10×0.001×1×0.000001=1,591.55

Resonant frequency 1,591.5494 Hz

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What are f₀ and Q for 10 Ω, 10 mH and 1 µF in series?

About 1,591.55 Hz and Q = 10, so a bandwidth of about 159.15 Hz.

What resistance gives critical damping?

R = 2 √(L ÷ C); for 10 mH and 1 µF that is 200 Ω.

Related calculators