Signal-to-Noise Ratio Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Enter the signal and noise levels as powers or as amplitudes (same unit) to get the SNR in dB.
Result
SNRdB
Ratio signal ÷ noise
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Values are: choose Powers (W, mW…) or Amplitudes (V, mV…).
- Signal level: enter 0 or more.
- Noise level (same unit): enter 0 or more.
- Read the result: SNR; the panel also shows Ratio signal ÷ noise.
How this calculator works
SNR(dB) = 10 × log₁₀(P_signal ÷ P_noise) for powers, or 20 × log₁₀(A_signal ÷ A_noise) for amplitudes such as RMS voltages measured across the same impedance (power goes with the square of amplitude).
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Values are | ||
| Signal level | ||
| Noise level | same unit | |
| Ratio signal ÷ noise | ||
| SNR | dB |
Worked example
| Values are | Powers (W, mW…) |
|---|---|
| Signal level | 50 |
| Noise level (same unit) | 0.5 |
| Ratio signal ÷ noise | 100 |
|---|
SNR 20 dB
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is the SNR of 50 W of signal over 0.5 W of noise?
20 dB: the ratio is 100.
What does a negative SNR mean?
The noise is stronger than the signal.