Skip to content
FiftyCalc Free calculators for all 50 states

Solenoid Inductance Calculator

Test cases replayed : 2 of 2 match · Methodology · Sources

Enter the turns, coil length and diameter, and the core's relative permeability to estimate the inductance.

Result

Sample figures

Inductance—mH

Cross-section area (cm²) —

  • Inductance (µH)—

Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.

Solenoid Inductance Calculator

Number of turns N: enter 0 or more. Prefilled example: 500.

Coil length, in cm: enter 0 or more. Prefilled example: 10.

Coil diameter, in cm: enter 0 or more. Prefilled example: 2.

Relative permeability of the core μr (1 = air): enter 0 or more. Prefilled example: 1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Number of turns N: enter 0 or more.
  2. Coil length, in cm: enter 0 or more.
  3. Coil diameter, in cm: enter 0 or more.
  4. Relative permeability of the core μr (1 = air): enter 0 or more.
  5. Read the result: Inductance; the panel also shows Cross-section area (cm²) and Inductance (µH).

Sources

How this calculator works

L = μ₀ × μr × N² × A ÷ l, the inductance of a long solenoid (length much greater than diameter), with A = π(d/2)² and μ₀ = 1.25663706127 × 10⁻⁶ N/A² (NIST CODATA 2022 values, read on physics.nist.gov/cuu on 2026-10-27).

Short coils have less inductance than this formula gives, because the field leaks at the ends.

The formula

  1. A=π×(d÷2)2
  2. Mh=1,000×0.00000125663706127×mur×n2×(A÷10,000)len÷100
Symbols used in the formula
SymbolMeaningUnit
nNumber of turns N
lenCoil lengthcm
dCoil diametercm
murRelative permeability of the core μr (1 = air)
ACross-section areacm²
MhInductancemH

Worked example

Number of turns N500
Coil length10 cm
Coil diameter2 cm
Relative permeability of the core μr (1 = air)1
Cross-section area (cm²)3.1416
Inductance (µH)986.9604
  1. A=3.14159×(2÷2)2=3.14159
  2. Mh=1,000×0.00000125663706127×1×5002×(3.14159÷10,000)10÷100=0.98696

Inductance 0.987 mH

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the inductance of 500 turns, 10 cm long, 2 cm wide, air core?

About 0.987 mH (986.96 µH).

What if I double the turns?

Inductance goes up four times, as it grows with N².

Related calculators