Skip to content
FiftyCalc Free calculators for all 50 states

Voltage Divider Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the input voltage and the two resistors (and a load if one is connected) to get the output voltage.

Result

Sample figures

Output voltage—V

Effective bottom resistance (kΩ) —

  • Current through R1 (mA)—
  • Division ratio Vout / Vin—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Voltage Divider Calculator

Input voltage, in V: enter a number. Prefilled example: 12.

R1, top resistor, in kΩ: enter 0 or more. Prefilled example: 10.

R2, bottom resistor, in kΩ: enter 0 or more. Prefilled example: 4.7.

Load resistance across R2 (0 = no load), in kΩ: enter 0 or more. Prefilled example: 0.

Affiliate link

This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.

Search Amazon for resistor assortment kits. Visit Amazon

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Input voltage, in V: enter a number.
  2. R1, top resistor, in kΩ: enter 0 or more.
  3. R2, bottom resistor, in kΩ: enter 0 or more.
  4. Load resistance across R2 (0 = no load), in kΩ: enter 0 or more.
  5. Read the result: Output voltage; the panel also shows Effective bottom resistance (kΩ), Current through R1 (mA) and Division ratio Vout / Vin.

How this calculator works

Vout = Vin × R2 / (R1 + R2), from Ohm's law and the fact that the same current flows through both resistors in series.

A load R_L connected across R2 acts in parallel with it: R2' = R2 × R_L / (R2 + R_L), which lowers the output. With resistances in kΩ the current is in mA.

The formula

  1. R={r2×rlr2+rlif rl>0r2otherwise
  2. V=vin×Rr1+R
Symbols used in the formula
SymbolMeaningUnit
vinInput voltageV
r1R1, top resistorkΩ
r2R2, bottom resistorkΩ
rlLoad resistance across R2 (0 = no load)kΩ
REffective bottom resistancekΩ
VOutput voltageV

Worked example

Input voltage12 V
R1, top resistor10 kΩ
R2, bottom resistor4.7 kΩ
Load resistance across R2 (0 = no load)0 kΩ
Effective bottom resistance (kΩ)4.7
Current through R1 (mA)0.8163
Division ratio Vout / Vin0.3197
  1. R=4.7
  2. V=12×4.710+4.7=3.83673

Output voltage 3.8367 V

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

Can I power a device from a voltage divider?

Only a very light load: the output drops as the load draws current. A voltage regulator is used for real power supplies.

How do I halve a voltage?

Use two equal resistors: Vout = Vin / 2 with no load.

Related calculators