Wire Gauge Calculator
Test cases replayed : 3 of 3 match · Methodology · Sources
Pick an AWG size to get its diameter, cross-section area and the resistance of annealed copper wire of that size.
Result
Areamm²
Diameter (inches)
Reading the result
At a glance
What moves the result
Method and sources: How this calculator works, Sources
- Diameter (mm)
- Area (kcmil)
- Copper resistance at 20 °C (ohms per 1,000 ft)
- Copper resistance at 20 °C (ohms per km)
Estimate for planning only, not tax, legal, financial or medical advice. Check important figures with the official source listed on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
Affiliate link
This is an affiliate link. As an Amazon Associate I earn from qualifying purchases. This does not change the result.
Search Amazon for electrical wire. Visit Amazon
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Wire size (AWG): choose one of the 44 options in the list.
- Read the result: Area; the panel also shows Diameter (inches), Diameter (mm), Area (kcmil), Copper resistance at 20 °C (ohms per 1,000 ft) and Copper resistance at 20 °C (ohms per km).
Sources
- NBS Handbook 100, Copper Wire Tables National Bureau of Standards (NIST) checked on 2026-11-01
How this calculator works
The American Wire Gauge is a geometric series: No. 0000 is 0.4600 in and No. 36 is 0.0050 in, with 38 steps between, so d(n) = 0.005 in × 92^((36 − n)/39) (NIST Handbook 100, Copper Wire Tables, nvlpubs.nist.gov, read October 27, 2026). Sizes 0000 to 0 are entered as −3 to 0.
Area in circular mils = (diameter in mils)²; 1 mil = 0.001 in. Resistance uses the International Annealed Copper Standard, 10.371 Ω·cmil/ft at 20 °C (same handbook). Published tables round diameters to 0.1 mil, so the last digit can differ slightly.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Wire size (AWG) | ||
| Diameter | inches | |
| Area | mm² |
Worked example
| Wire size (AWG) | 12 |
|---|
| Diameter (inches) | 0.0808 |
|---|---|
| Diameter (mm) | 2.0525 |
| Area (kcmil) | 6.5299 |
| Copper resistance at 20 °C (ohms per 1,000 ft) | 1.5882 |
| Copper resistance at 20 °C (ohms per km) | 5.2107 |
Area 3.3088 mm²
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What is the diameter of 12 AWG wire?
About 0.0808 in (2.053 mm), with an area of about 3.31 mm².
Does a bigger gauge number mean a thicker wire?
No, the opposite: every 6 gauge numbers the diameter halves, and every 3 numbers the area roughly halves.