Aluminum Weight Calculator
Test cases replayed : 3 of 3 match · Methodology · No outside source listed
Choose the shape and alloy, enter the dimensions in inches to get the weight.
Result
Total weightlb
Volume of one piece (cubic inches)
- Total weight (kilograms)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Shape: choose Plate or sheet, Round bar or Round tube.
- Alloy (density): choose 6061 or 6063 (2.70 g/cm³), 5052 (2.68 g/cm³), 3003 (2.73 g/cm³) or 7075 (2.81 g/cm³).
- Length, in in: enter 0 or more.
- Width, plate, in in: enter 0 or more.
- Thickness, plate, in in: enter 0 or more.
- Diameter or outside diameter, bar or tube, in in: enter 0 or more.
- Wall thickness, tube, in in: enter 0 or more.
- Quantity: enter 1 or more.
- Read the result: Total weight; the panel also shows Volume of one piece (cubic inches) and Total weight (kilograms).
How this calculator works
Weight = volume × density. Plate: length × width × thickness; round bar: π × (D ÷ 2)² × length; tube: π × ((OD ÷ 2)² − (OD ÷ 2 − wall)²) × length.
Densities are the Aluminum Association's typical values for each alloy; 1 g/cm³ = 0.036127292 lb/in³, so 6061 at 2.70 g/cm³ is 0.0975 lb per cubic inch.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Shape (1: Plate or sheet; 2: Round bar; 3: Round tube) | ||
| Alloy (density) | ||
| Length | in | |
| Width, plate | in | |
| Thickness, plate | in | |
| Diameter or outside diameter, bar or tube | in | |
| Wall thickness, tube | in | |
| Quantity | ||
| Volume of one piece | cubic inches | |
| Total weight | lb |
Worked example
| Shape | Plate or sheet |
|---|---|
| Alloy (density) | 6061 or 6063 (2.70 g/cm³) |
| Length | 48 in |
| Width, plate | 24 in |
| Thickness, plate | 0.25 in |
| Diameter or outside diameter, bar or tube | 2 in |
| Wall thickness, tube | 0.125 in |
| Quantity | 1 |
| Volume of one piece (cubic inches) | 288 |
|---|---|
| Total weight (kilograms) | 12.74 |
Total weight 28.09 lb
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
How much does a 4 × 8 ft sheet of 1/8-inch aluminum weigh?
48 × 96 × 0.125 = 576 cubic inches; in 6061, about 56.19 lb.
Is aluminum lighter than steel?
Yes, about one third: 2.70 g/cm³ for 6061 against about 7.85 g/cm³ for carbon steel.