Skip to content
FiftyCalc Free calculators for all 50 states

Plate Weight Calculator

Test cases replayed : 3 of 3 match · Methodology · No outside source listed

Choose the metal, then enter the plate length, width, thickness and number of plates.

Result

Sample figures

Total weight—lb

Total weight (kilograms) —

  • Weight per square foot (pounds)—

The unit choice applies to the fields you fill in. Results stay in the units written with them.

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Plate Weight Calculator

Units: switches the fields between the two unit systems.

Metal: choose one of the 8 options in the list. Prefilled example: Carbon steel (7.85 g/cm³).

Length, in in: enter 0 or more. Prefilled example: 96.

Width, in in: enter 0 or more. Prefilled example: 48.

Thickness, in in: enter 0 or more. Prefilled example: 0.25.

Plates: enter 1 or more. Prefilled example: 1.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Units: switches the fields between the two unit systems.
  2. Metal: choose one of the 8 options in the list.
  3. Custom density (g/cm³), used with Custom: enter 0 or more.
  4. Length, in in: enter 0 or more.
  5. Width, in in: enter 0 or more.
  6. Thickness, in in: enter 0 or more.
  7. Plates: enter 1 or more.
  8. Read the result: Total weight; the panel also shows Total weight (kilograms) and Weight per square foot (pounds).

How this calculator works

Weight = length × width × thickness × density. For carbon steel at 7.85 g/cm³ (0.2836 lb/in³), a 1-inch plate weighs about 40.84 pounds per square foot.

Metal densities from The Engineering ToolBox, Metals and Alloys - Densities (https://www.engineeringtoolbox.com/metal-alloys-densities-d_50.html), read on 2026-10-27: steel 7,850 kg/m³, aluminum alloy 6061 2,720, copper 8,940, yellow brass 8,470, lead 11,340, titanium 4,500, zinc 7,135 kg/m³. Stainless steels vary (7,480 to 8,000 kg/m³ on the same page): use the custom density for them.

Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds.

The formula

  1. Lb=L×W×t×{ρif ρ>0crotherwise×0.03612729200008368×n
Symbols used in the formula
SymbolMeaningUnit
ρMetal (7.85: Carbon steel (7.85 g/cm³); 2.72: Aluminum 6061 (2.72 g/cm³); 8.94: Copper (8.94 g/cm³); 8.47: Yellow brass (8.47 g/cm³); 11.34: Lead (11.34 g/cm³); 4.5: Titanium (4.50 g/cm³); 7.135: Zinc (7.135 g/cm³); 0: Custom density (enter below))
crCustom density (g/cm³), used with Custom
LLengthin
WWidthin
tThicknessin
nPlates
LbTotal weightlb

Worked example

MetalCarbon steel (7.85 g/cm³)
Length96 in
Width48 in
Thickness0.25 in
Plates1
Total weight (kilograms)148.19
Weight per square foot (pounds)10.21
  1. Lb=96×48×0.25×7.85×0.03612729200008368×1=326.706

Total weight 326.71 lb

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

How much does a 4 × 8 foot sheet of 1/4-inch steel plate weigh?

96 × 48 × 0.25 = 1,152 cubic inches × 0.28360 = about 326.71 pounds.

And the same sheet in 6061 aluminum?

With 2.72 g/cm³: about 113.20 pounds.

Related calculators