Skip to content
FiftyCalc Free calculators for all 50 states

Pitch Diameter Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Choose inch (diametral pitch) or metric (module) gears, then enter the number of teeth.

Result

Sample figures

Pitch diameter (inches, or mm for module)—

Outside diameter, full-depth teeth (same unit) —

  • Circular pitch (same unit)—
  • Equivalent module (mm) or diametral pitch—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Pitch Diameter Calculator

Gear system

Gear system: choose Diametral pitch (inch) or Module (metric, mm). Prefilled example: Diametral pitch (inch).

Number of teeth: enter 1 or more. Prefilled example: 32.

Diametral pitch (teeth per inch) or module, in mm: enter 0.001 or more. Prefilled example: 16.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Gear system: choose Diametral pitch (inch) or Module (metric, mm).
  2. Number of teeth: enter 1 or more.
  3. Diametral pitch (teeth per inch) or module, in mm: enter 0.001 or more.
  4. Read the result: Pitch diameter (inches, or mm for module); the panel also shows Outside diameter, full-depth teeth (same unit), Circular pitch (same unit) and Equivalent module (mm) or diametral pitch.

How this calculator works

Inch gears: pitch diameter D = N ÷ P, outside diameter = (N + 2) ÷ P for full-depth teeth, circular pitch = π ÷ P, read on 2026-10-27 on Engineers Edge, Gear Design Equations (https://engineersedge.com/gear_formula.htm).

Metric gears: module m = pitch diameter ÷ number of teeth, so d = m × N; module and diametral pitch are linked by m = 25.4 ÷ P (Design World, Module vs. diametral pitch, https://www.designworldonline.com/difference-between-module-diametral-pitch-for-rack-and-pinion-drives/, read on 2026-10-27; module is defined by ISO 54).

The formula

  1. D={NPif sys=1N×Potherwise
Symbols used in the formula
SymbolMeaningUnit
sysGear system (1: Diametral pitch (inch); 2: Module (metric, mm))
NNumber of teeth
PDiametral pitch (teeth per inch) or modulemm
DPitch diameter (or mm for module)inches

Worked example

Gear systemDiametral pitch (inch)
Number of teeth32
Diametral pitch (teeth per inch) or module16 mm
Outside diameter, full-depth teeth (same unit)2.125
Circular pitch (same unit)0.1963
Equivalent module (mm) or diametral pitch1.5875
  1. D=3216=2

Pitch diameter (inches, or mm for module) 2

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the pitch diameter of a 32-tooth, 16 DP gear?

32 ÷ 16 = 2 inches; its outside diameter is 34 ÷ 16 = 2.125 inches.

What module matches 16 diametral pitch?

25.4 ÷ 16 = 1.5875 mm, close to the standard module 1.5 but not interchangeable.

Related calculators