Skip to content
FiftyCalc Free calculators for all 50 states

Speeds and Feeds Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Enter the cutting speed for your material and tool, the tool diameter, the flutes and the chip load to get RPM and feed rate.

Result

Sample figures

Spindle speed—RPM

Feed rate (in/min) —

  • Feed rate (mm/min)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Speeds and Feeds Calculator

Cutting speed (SFM, surface feet per minute): enter 0 or more. Prefilled example: 400.

Tool diameter, in in: enter 0 or more. Prefilled example: 0.5.

Number of flutes (teeth): enter 0 or more. Prefilled example: 4.

Chip load (in per tooth): enter 0 or more. Prefilled example: 0.002.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Cutting speed (SFM, surface feet per minute): enter 0 or more.
  2. Tool diameter, in in: enter 0 or more.
  3. Number of flutes (teeth): enter 0 or more.
  4. Chip load (in per tooth): enter 0 or more.
  5. Read the result: Spindle speed; the panel also shows Feed rate (in/min) and Feed rate (mm/min).

How this calculator works

RPM = 12 × SFM ÷ (π × D) and feed (IPM) = RPM × number of teeth × chip load, the standard machining formulas (12 converts feet to inches; π × D is the tool's circumference in inches).

Cutting speed and chip load depend on the material, tool and machine; take them from your tool maker's chart.

The formula

  1. Rpm=12×sfmπ×d
Symbols used in the formula
SymbolMeaningUnit
sfmCutting speed (SFM, surface feet per minute)
dTool diameterin
RpmSpindle speedRPM

Worked example

Cutting speed (SFM, surface feet per minute)400
Tool diameter0.5 in
Number of flutes (teeth)4
Chip load (in per tooth)0.002
Feed rate (in/min)24.4462
Feed rate (mm/min)620.9335
  1. Rpm=12×4003.14159×0.5=3,055.77

Spindle speed 3,055.7749 RPM

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What RPM is 400 SFM with a 1/2 in cutter?

About 3,056 RPM (3,055.77).

What feed goes with it at 0.002 in/tooth, 4 flutes?

About 24.45 in/min.

Related calculators