Skip to content
FiftyCalc Free calculators for all 50 states

Punch Force Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

Choose the hole shape, enter its size, the sheet thickness and the material's shear strength.

Result

Sample figures

Punch force (US tons)—

Cut perimeter (inches) —

  • Punch force (pounds-force)—
  • Punch force (kilonewtons)—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Punch Force Calculator

Hole shape

Hole shape: choose Round (diameter a), Rectangle (a × b) or Other (perimeter a). Prefilled example: Round (diameter a).

Diameter, side a, or perimeter, in in: enter 0 or more. Prefilled example: 0.5.

Sheet thickness, in in: enter 0 or more. Prefilled example: 0.125.

Shear strength of the material (50,000 is only an example, use your material's), in psi: enter 0 or more. Prefilled example: 50,000.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Hole shape: choose Round (diameter a), Rectangle (a × b) or Other (perimeter a).
  2. Diameter, side a, or perimeter, in in: enter 0 or more.
  3. Side b, rectangle, in in: enter 0 or more.
  4. Sheet thickness, in in: enter 0 or more.
  5. Shear strength of the material (50,000 is only an example, use your material's), in psi: enter 0 or more.
  6. Read the result: Punch force (US tons); the panel also shows Cut perimeter (inches), Punch force (pounds-force) and Punch force (kilonewtons).

How this calculator works

Punching shears the metal along the edge of the hole, so force = cut perimeter × thickness × shear strength of the material. Tons = pounds ÷ 2,000.

1 pound-force = 4.448222 N, read on 2026-10-27 in NIST Special Publication 811, Appendix B.9 (https://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors/nist-guide-si-appendix-b9). Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds.

Shear strength depends on the alloy and temper; take it from the material data. Dull punches or tight clearance raise the real force.

The formula

  1. Per={π×aif s=12×(a+b)if s=2aotherwise
  2. F=Per×t×S2
  3. To=F2,000
Symbols used in the formula
SymbolMeaningUnit
sHole shape (1: Round (diameter a); 2: Rectangle (a × b); 3: Other (perimeter a))
aDiameter, side a, or perimeterin
bSide b, rectanglein
tSheet thicknessin
S2Shear strength of the material (50,000 is only an example, use your material's)psi
PerCut perimeterinches
FPunch force (pounds-force)
ToPunch forceUS tons

Worked example

Hole shapeRound (diameter a)
Diameter, side a, or perimeter0.5 in
Sheet thickness0.125 in
Shear strength of the material (50,000 is only an example, use your material's)50,000 psi
Cut perimeter (inches)1.5708
Punch force (pounds-force)9,817
Punch force (kilonewtons)43.67
  1. Per=3.14159×0.5=1.5708
  2. F=1.5708×0.125×50,000=9,817.48
  3. To=9,817.482,000=4.90874

Punch force (US tons) 4.91

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What force punches a 1/2-inch hole in 1/8-inch sheet at 50,000 psi shear?

π × 0.5 × 0.125 × 50,000 ≈ 9,817 lbf, about 4.91 tons.

Why the perimeter and not the area?

The punch cuts only along the outline; the force grows with the length of that cut, not with the hole's area.

Related calculators