K-Factor Calculator
Test cases replayed : 2 of 2 match · Methodology · No outside source listed
Bend a test piece, measure its bend allowance, then enter it with the bend angle, inside radius and thickness to find your K-factor.
Result
K-factor
Neutral axis distance from the inside face (inches)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Measured bend allowance, in in: enter 0 or more.
- Bend angle, in °: enter a number from 0.1 to 180.
- Inside bend radius, in in: enter 0 or more.
- Material thickness, in in: enter 0.0001 or more.
- Read the result: K-factor; the panel also shows Neutral axis distance from the inside face (inches).
How this calculator works
Bend allowance BA = (π ÷ 180) × A × (R + K × T), where A is the bend angle in degrees, R the inside radius, T the thickness and K the share of the thickness at which the neutral axis lies. Solved for K: K = (BA ÷ (A in radians) − R) ÷ T.
Formula read on 2026-10-27 on Calculate.co.nz, Bend Allowance Calculator (https://www.calculate.co.nz/bend-allowance-calculator.php) and Durma, Bend Allowance Formula (https://www.durmapress.com/pt/sheet-metal-bending-bend-allowance-calculation-guide/). Measured bends usually give K between about 0.3 and 0.5.
The formula
| Symbol | Meaning | Unit |
|---|---|---|
| Measured bend allowance | in | |
| Bend angle | ° | |
| Inside bend radius | in | |
| Material thickness | in | |
| K-factor | ||
rad(x) | the angle x, converted from degrees to radians. |
Worked example
| Measured bend allowance | 0.24 in |
|---|---|
| Bend angle | 90 ° |
| Inside bend radius | 0.125 in |
| Material thickness | 0.0625 in |
| Neutral axis distance from the inside face (inches) | 0.0278 |
|---|
K-factor 0.4446
Each step uses the unrounded value of the step before it; figures on this page are rounded for display.
Frequently asked questions
What K-factor does a 90° bend with BA 0.24 in, R 0.125 in and T 0.0625 in give?
0.24 ÷ 1.5708 = 0.15279; minus 0.125 = 0.02779; ÷ 0.0625 = K ≈ 0.4446.
Can the K-factor be above 0.5?
Not in ordinary bending: the neutral axis moves toward the inside of the bend, so K stays at or under 0.5.