Metal Weight Calculator
Test cases replayed : 3 of 3 match · Methodology · No outside source listed
Choose the metal and the shape, then enter the cross-section in inches and the length.
Result
Total weightlb
Cross-section area (square inches)
- Density used (g/cm³)
- Total weight (kilograms)
- Weight per foot of length (pounds)
The unit choice applies to the fields you fill in. Results stay in the units written with them.
Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.
This browser did not allow copying. The sentence is in the box below, already selected: copy it with your keyboard or the menu.
How to use this calculator
Fill in the fields in this order; each step takes you to its field.
- Units: switches the fields between the two unit systems.
- Metal: choose one of the 8 options in the list.
- Custom density (g/cm³), used with Custom: enter 0 or more.
- Shape: choose one of the 6 options in the list.
- Dimension A, in in: enter 0 or more.
- Dimension B: thickness of a plate, second side of a tube, in in: enter 0 or more.
- Wall thickness, tubes, in in: enter 0 or more.
- Length, in in: enter 0 or more.
- Pieces: enter 1 or more.
- Read the result: Total weight; the panel also shows Cross-section area (square inches), Density used (g/cm³), Total weight (kilograms) and Weight per foot of length (pounds).
How this calculator works
Weight = cross-section area × length × density. Areas: plate A × B; round π × A² ÷ 4; square A²; hex (across flats) √3 ÷ 2 × A²; round tube π ÷ 4 × (A² − (A − 2 × wall)²); rectangular tube A × B − (A − 2 × wall) × (B − 2 × wall). Sharp corners are assumed.
Metal densities from The Engineering ToolBox, Metals and Alloys - Densities (https://www.engineeringtoolbox.com/metal-alloys-densities-d_50.html), read on 2026-10-27: steel 7,850 kg/m³, aluminum alloy 6061 2,720, copper 8,940, yellow brass 8,470, lead 11,340, titanium 4,500, zinc 7,135 kg/m³. Stainless steels vary (7,480 to 8,000 kg/m³ on the same page): use the custom density for them.
1 g/cm³ = 0.036127292 lb per cubic inch. Unit factors from NIST Handbook 44 (2026), Appendix C, General Tables of Units of Measurement (https://www.nist.gov/document/2026-nist-handbook-44-appendix-c), read on 2026-10-27: 1 inch = 2.54 cm exactly, 1 cubic foot = 1,728 cubic inches, 1 gallon = 231 cubic inches = 3.785411784 L, 1 cubic yard = 27 cubic feet, 1 pound = 0.45359237 kg, 1 ton = 2,000 pounds.
Worked example
| Metal | Carbon steel (7.85 g/cm³) |
|---|---|
| Custom density (g/cm³), used with Custom | 8 |
| Shape | Round bar (diameter A) |
| Dimension A | 1 in |
| Dimension B: thickness of a plate, second side of a tube | 0.25 in |
| Wall thickness, tubes | 0.125 in |
| Length | 120 in |
| Pieces | 1 |
| Cross-section area (square inches) | 0.7854 |
|---|---|
| Density used (g/cm³) | 7.85 |
| Total weight | 26.73 lb |
| Total weight (kilograms) | 12.12 |
| Weight per foot of length (pounds) | 2.6729 |
Frequently asked questions
How much does a 10-foot, 1-inch round steel bar weigh?
π ÷ 4 × 1² × 120 = 94.25 cubic inches × 7.85 × 0.036127 = about 26.73 pounds (2.67 lb per foot).
How much lighter is aluminum than steel?
With 2.72 against 7.85 g/cm³, the same aluminum part weighs about 35% of the steel one.