Skip to content
FiftyCalc Free calculators for all 50 states

Bend Allowance Calculator

Test cases replayed : 2 of 2 match · Methodology · No outside source listed

When sheet metal bends, the neutral axis keeps its length. Enter the bend angle, inside radius, thickness and K-factor to size the flat blank.

Result

Sample figures

Bend allowance—

Outside setback —

  • Bend deduction—

Estimate for planning only, not tax, legal, financial or medical advice. This calculator uses the method explained on this page.

Bend Allowance Calculator

Bend angle, in °: enter a number from 0 to 180. Prefilled example: 90.

Inside bend radius: enter 0 or more. Prefilled example: 0.125.

Material thickness (same unit): enter 0 or more. Prefilled example: 0.0625.

K-factor (neutral axis position, 0 to 0.5): enter a number from 0 to 0.5. Prefilled example: 0.44.

How to use this calculator

Fill in the fields in this order; each step takes you to its field.

  1. Bend angle, in °: enter a number from 0 to 180.
  2. Inside bend radius: enter 0 or more.
  3. Material thickness (same unit): enter 0 or more.
  4. K-factor (neutral axis position, 0 to 0.5): enter a number from 0 to 0.5.
  5. Read the result: Bend allowance; the panel also shows Outside setback and Bend deduction.

How this calculator works

Bend allowance BA = θ × (R + K × T), with θ the bend angle in radians, R the inside radius, T the thickness and K the K-factor (the neutral axis position as a share of the thickness). It is the arc length of the neutral axis through the bend.

Outside setback OSSB = tan(θ ÷ 2) × (R + T); bend deduction BD = 2 × OSSB − BA. Flat length = sum of the flange lengths to the mold lines − BD for each bend. K-factor depends on material, tooling and R ÷ T; 0.33 to 0.5 are common values.

The formula

  1. Ba=rad⁡(a)×(r+k×t)
Symbols used in the formula
SymbolMeaningUnit
aBend angle°
rInside bend radius
tMaterial thicknesssame unit
kK-factor (neutral axis position, 0 to 0.5)
BaBend allowance
rad(x)the angle x, converted from degrees to radians.

Worked example

Bend angle90 °
Inside bend radius0.125
Material thickness (same unit)0.0625
K-factor (neutral axis position, 0 to 0.5)0.44
Outside setback0.1875
Bend deduction0.1355
  1. Ba=rad⁡(90)×(0.125+0.44×0.0625)=0.239546

Bend allowance 0.2395

Each step uses the unrounded value of the step before it; figures on this page are rounded for display.

Frequently asked questions

What is the bend allowance of a 90° bend, R = 0.125 in, T = 0.0625 in, K = 0.44?

π ÷ 2 × (0.125 + 0.0275) ≈ 0.2395 in.

What is the K-factor?

Where the neutral axis sits through the thickness: 0.5 is the middle; real bends shift it toward the inside.

Related calculators